Home | Ezine | Forums | Links | Contact
NitroExpress.com: Lowest QR rings for Brno 602/CZ550

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies


*** Enjoy NitroExpress.com? Participate and join in. ***

Shooting & Reloading - Mausers, Big Bores and others >> Big Bore Rifles

Pages: 1
cr500
.300 member


Reged: 11/10/03
Posts: 217
Loc: Singleton ,Australia
Lowest QR rings for Brno 602/CZ550
      #17781 - 10/08/04 04:13 PM

Can any one tell me if there are any rings to suit Brno 602s integral dovetail which are lower than the Talleys. I was after some rings to suit 1" scope which sit as low as possible. Are the warnes lower? Quick detachable is prefered.

Post Extras: Print Post   Remind Me!   Notify Moderator  
atkinson6
.375 member


Reged: 26/01/04
Posts: 678
Loc: Idaho
Re: Lowest QR rings for Brno 602/CZ550 [Re: cr500]
      #18692 - 31/08/04 07:37 AM

I had Jim Brockman hand fit custom bases and my scope lies damn near on the receiver..Same with my Searcy Mauser..I can only use 20 MM objective scopes such as the 1x4, 1.5x5 or 3X Leupolds however...

Post Extras: Print Post   Remind Me!   Notify Moderator  
JPK
.375 member


Reged: 31/08/04
Posts: 734
Loc: Chevy Chase, MD
Re: Lowest QR rings for Brno 602/CZ550 [Re: atkinson6]
      #18780 - 02/09/04 05:30 AM

Hi, I'm new and looking forward to learning a bunch and sharing what I've learned (or think I've learned) when I can.

Could use some help on this topic. I've got a 30-06 Dakota model 76 and one in 375 H&H too. Both were equiped with Talley bases and their lowest rings, the 30-06 fixed and the 375 QD but I've found that the setup puts the scope a bit high for me. I'm in the process of changing out the '06 bases and rings for Dakota suplied Leupold etc compatable bases and a set of Leupold low or ultra low rings depending on whether the ultra low will allow bolt handle and objective clearence for a Leupold 2.5X8 VariX III. The bases should arrive today or tommorow. I want to keep the 375 set up with QD's and can live with the set up as is but would love to drop the scope height if possible. This rifle is matched with a 1.5X5 VariX III and a twin also in Tally QD rings for a spare or a different zero, range or bullet wise. This stuff is beyond my local gunshop's experience and while they're willing they have no suggestions.

Any thoughts or sugestions would be apreciated.

John


Post Extras: Print Post   Remind Me!   Notify Moderator  
Pages: 1



Extra information
0 registered and 31 anonymous users are browsing this forum.

Moderator:   

Print Topic

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Topic views: 1761

Rate this topic

Jump to

Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved