Forums.NitroExpress.com

Home | Ezine | Forums | Links | Contact NitroExpress.com: Screw-drivers for narrow slot Mannlicher screws?

*** Enjoy NitroExpress.com? Participate and join in. ***

You are not logged in. [Login]

Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Shooting & Reloading - Mausers, Big Bores and others >> Mannlicher Discussion forum & Archive

Pages: 1

Wurger
.275 member

Reged: 23/12/12
Posts: 53
Loc: PA, USA

Screw-drivers for narrow slot Mannlicher screws?
#222292 - 24/12/12 01:08 PM

Bought a nice condition 1908 MS in 8x56MS. I'll try to post some photos later. My set of screwdrivers (from B-Square) are too big to fit the very small slots on my Mannlicher. Is there a reasonably priced set of gunsmith screwdrivers that would be appropriate or do I need to modify the ones I have? I also remember someone selling 'English'(???) screwdrivers with wooden handles that were advertised for the narrow slots but again, I can't locate them now.

Also, my set trigger does not function. Does not engage the sear and stay set. The forward trigger is very smooth and about three pounds pull so the rifle is still functional. I seem to remember a firm in Germany selling Mannlicher parts but I can't find them now. Is there anyone that has parts available today? I'll know which parts are faulty when I'm able to take the rifle apart.

Post Extras:

Wurger
.275 member

Reged: 23/12/12
Posts: 53
Loc: PA, USA

Re: Screw-drivers for narrow slot Mannlicher screws? [Re: Wurger]
#222296 - 24/12/12 02:33 PM

Ah-HaH!!!!

Think I found something....need to take some measurements.

http://www.brownells.com/gunsmith-tools-...ts-prod425.aspx

Post Extras:

darwinmauser
.300 member

Reged: 07/05/07
Posts: 217
Loc: Darwin NT

Re: Screw-drivers for narrow slot Mannlicher screws? [Re: Wurger]
#222297 - 24/12/12 04:32 PM

your trigger parts should be available from Erick Schroder. (Hope this link works)

http://www.mannlicher.org/links

Edited by darwinmauser (24/12/12 07:34 PM)

Post Extras:

casper50
.400 member

Reged: 18/10/07
Posts: 1445
Loc: Alaska

Re: Screw-drivers for narrow slot Mannlicher screws? [Re: darwinmauser]
#222301 - 24/12/12 06:14 PM

Darwin I can't get the site to work. Says forbidden. When I click on the site English it goes to forbidden again

Post Extras:

greenshoots
.300 member

Reged: 23/05/08
Posts: 204
Loc: uk

Re: Screw-drivers for narrow slot Mannlicher screws? [Re: casper50]
#222306 - 24/12/12 07:47 PM

'English'(???) screwdrivers

turn screws old boy (in posh english voice)

greenshoots

Post Extras:

Mike_Bailey
.400 member

Reged: 26/02/07
Posts: 2289
Loc: GB

Re: Screw-drivers for narrow slot Mannlicher screws? [Re: greenshoots]
#222307 - 24/12/12 09:44 PM

Wurger, I have one of those Brownells kits, they are great but buy the comprehensive one, not the smaller one, best, Mike

Post Extras:

Mike_Bailey
.400 member

Reged: 26/02/07
Posts: 2289
Loc: GB

Re: Screw-drivers for narrow slot Mannlicher screws? [Re: Mike_Bailey]
#222308 - 24/12/12 09:48 PM

Wurger, here is the link

http://www.brownells.com/gunsmith-tools-...s--prod417.aspx

You will, at some time, use them all !

Post Extras:

Wurger
.275 member

Reged: 23/12/12
Posts: 53
Loc: PA, USA

Re: Screw-drivers for narrow slot Mannlicher screws? [Re: darwinmauser]
#222325 - 25/12/12 05:17 AM

Quote:

your trigger parts should be available from Erick Schroder. (Hope this link works)

http://www.mannlicher.org/links

Yes, very helpful. Thank You

Post Extras:

Wurger
.275 member

Reged: 23/12/12
Posts: 53
Loc: PA, USA

Re: Screw-drivers for narrow slot Mannlicher screws? [Re: greenshoots]
#222326 - 25/12/12 05:22 AM

Quote:

'English'(???) screwdrivers

turn screws old boy (in posh english voice)

greenshoots

Hmmmm....I could have sworn they were refered to as 'English'(woden handle and fixed blade screwdriver made by an English Gunsmith individual or company), could be wrong.

I get enough of the "Posh English Voice" at home since my Wife is an English citizen as well as my daughter as a dual-citizen. But thanks.

Edited by Wurger (26/12/12 03:16 PM)

Post Extras:

Wurger
.275 member

Reged: 23/12/12
Posts: 53
Loc: PA, USA

Re: Screw-drivers for narrow slot Mannlicher screws? [Re: Wurger]
#222370 - 26/12/12 03:15 PM

Just did some measurements. I wish they had standardized on one slot width!

Screws for MS 1908
Front Receiver Stock Screw
Actual: .024 x .400
Rear Trigger Guard Screw
Actual: .019 x .300
Under the Trigger Guard Screw Unable to directly measure slot width.
.024(est.) x .350(actual)
Front Sling Swivel:
Actual: .023 x .220

Screws for 1952 MS .30-06
Front Receiver Stock Screw
Actual: .032 x .375
Rear Trigger Guard Screw
Actual: .032 x .350
Front Sling Swivel:
Actual: .020 x .200

Screws for 1952 MS .270
Front Receiver Stock Screw
Actual: .030 x .375
Rear Trigger Guard Screw
Actual: .032 x .350
Front Sling Swivel:
Actual: .020 x .200

Edited by Wurger (26/12/12 03:39 PM)

Post Extras:

Pages: 1

Extra information

0 registered and 120 anonymous users are browsing this forum.

Moderator: CptCurl

Print Topic

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Topic views: 4379

Jump to

NitroExpress.com

Home | Ezine | Forums | Links | Contact