Home | Ezine | Forums | Links | Contact
NitroExpress.com: Screw-drivers for narrow slot Mannlicher screws?

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies


*** Enjoy NitroExpress.com? Participate and join in. ***

Shooting & Reloading - Mausers, Big Bores and others >> Mannlicher Discussion forum & Archive

Wurger
.275 member


Reged: 23/12/12
Posts: 53
Loc: PA, USA
Re: Screw-drivers for narrow slot Mannlicher screws?
      26/12/12 03:15 PM

Just did some measurements. I wish they had standardized on one slot width!

Screws for MS 1908
Front Receiver Stock Screw
Actual: .024 x .400
Rear Trigger Guard Screw
Actual: .019 x .300
Under the Trigger Guard Screw Unable to directly measure slot width.
.024(est.) x .350(actual)
Front Sling Swivel:
Actual: .023 x .220

Screws for 1952 MS .30-06
Front Receiver Stock Screw
Actual: .032 x .375
Rear Trigger Guard Screw
Actual: .032 x .350
Front Sling Swivel:
Actual: .020 x .200

Screws for 1952 MS .270
Front Receiver Stock Screw
Actual: .030 x .375
Rear Trigger Guard Screw
Actual: .032 x .350
Front Sling Swivel:
Actual: .020 x .200

Edited by Wurger (26/12/12 03:39 PM)

Post Extras Print Post   Remind Me!     Notify Moderator


Entire topic
Subject Posted by Posted on
* Screw-drivers for narrow slot Mannlicher screws? Wurger 24/12/12 01:08 PM
. * * Re: Screw-drivers for narrow slot Mannlicher screws? Wurger   24/12/12 02:33 PM
. * * Re: Screw-drivers for narrow slot Mannlicher screws? darwinmauser   24/12/12 04:32 PM
. * * Re: Screw-drivers for narrow slot Mannlicher screws? Wurger   25/12/12 05:17 AM
. * * Re: Screw-drivers for narrow slot Mannlicher screws? casper50   24/12/12 06:14 PM
. * * Re: Screw-drivers for narrow slot Mannlicher screws? greenshoots   24/12/12 07:47 PM
. * * Re: Screw-drivers for narrow slot Mannlicher screws? Wurger   25/12/12 05:22 AM
. * * Re: Screw-drivers for narrow slot Mannlicher screws? Wurger   26/12/12 03:15 PM
. * * Re: Screw-drivers for narrow slot Mannlicher screws? Mike_Bailey   24/12/12 09:44 PM
. * * Re: Screw-drivers for narrow slot Mannlicher screws? Mike_Bailey   24/12/12 09:48 PM

Extra information
0 registered and 49 anonymous users are browsing this forum.

Moderator:  CptCurl 



Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 4795

Rate this thread

Jump to

Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved