| DarylS |
| (.700 member) |
| 03/04/18 02:57 AM |
|
Re: Choosing 7mm bullet
|
Quote:
Hello C. ,
I must add, to use the 7-08 Rem loads, MAXIMUM manual loads, as a normal loads in a 7x57. The volume difference is enough to do that.
I, also, don't want to push the working pressures in a 7x57. To load a 160 grs at 2700 f/s and a 175 grs at 2600 f/s (with the correct powders, of course) is to be at NORMA o RWS factory loads pressure levels.
Good luck!!
PH
Modern guns do this quite well. I'd likely not load a model 96 that high, but my 6.5x55 did just over 2,900fps with 129's and quite nicely.
CIP working maximums for the 7x57, 8x57 and 9.3x62 are all 57,000psi, all of which are chambered in model 96 and 94 Mausers.
55,000psi for the 6.5x55.