Forums.NitroExpress.com

Home | Ezine | Forums | Links | Contact NitroExpress.com: Converting a Lee Enfield into a bigger bore

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies

*** Enjoy NitroExpress.com? Participate and join in. ***

You are not logged in. [Login]

Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Shooting & Reloading - Mausers, Big Bores and others >> Rifles

DarylS
.700 member

Reged: 10/08/05
Posts: 26618
Loc: Beautiful British Columbia, Ca...

Re: Converting a Lee Enfield into a bigger bore
04/02/08 07:31 AM

Ken Waters did the wildcat larger bore chambering on a .303 a long time ago - in .338, .358 and .375, I believe.
: Everyone interested in Wildcats should buy the big book on Wildcats", available form Wolf Publishing called "Wildat Cartridges "Combo Edition".
: Dave Kiff is the ultimate for 'odd' chambering reamers. His prices are perhaps the best as well.
: I believe chamberings on the #3 should be kept to rounds you won't be running over about 50,000psi or under even with the straight sided "improved" ones. This might eliminate normal loadings in the .375 JDJ. It developes greater velocities than the .375 Winchester, a 50,000PSI round. Many of these JDJ wildcats were run up around 50,000CUP, which is closer to 55,000psi and 60,000psi depending on the ctg. imho.
; If built on a #4 or #5 in good condition, pressure isn't a problem as everything form .223's to .308 Winchester work good on them. The .308 (and it's offspring) are 60,000psi+ ctg's. although normally listed as around 55,000 CUP.
; If I were going to do this, and I might someday with my 'spare' #3, I'd go with the .444 Marlin case as the base and probably in a .358 or .375 chambering. For chamberings in .44cal or larger, I'd use a .45/70, .350 Rem mag or .45/90's 2.4"straight case. These are easily usable from 8mm on up to 45 cal.
; A SMLE in .45/90 is no slouch - it will drive a 500gr. bullet at 2,000fps in a #3 and 2,150fps in a #4, if throated properly.

--------------------
Daryl

"a gun without hammers is like a Spaniel without ears" King George V

Post Extras

Print Post

Remind Me!

Notify Moderator

Entire topic
Subject	Posted by	Posted on
Converting a Lee Enfield into a bigger bore	gwh	03/02/08 07:20 PM
Re: Converting a Lee Enfield into a bigger bore	Rolland	15/02/08 10:33 AM
Re: Converting a Lee Enfield into a bigger bore	88MauSporter	15/02/08 11:34 AM
Re: Converting a Lee Enfield into a bigger bore	Rolland	15/02/08 02:17 PM
Re: Converting a Lee Enfield into a bigger bore	88MauSporter	15/02/08 02:53 PM
Re: Converting a Lee Enfield into a bigger bore	Rolland	15/02/08 03:03 PM
Re: Converting a Lee Enfield into a bigger bore	gwh	15/02/08 06:49 PM
Re: Converting a Lee Enfield into a bigger bore	DarylS	16/02/08 03:34 AM
Re: Converting a Lee Enfield into a bigger bore	Rolland	16/02/08 06:06 AM
Re: Converting a Lee Enfield into a bigger bore	CowboyCS	16/02/08 12:47 PM
Re: Converting a Lee Enfield into a bigger bore	gwh	18/02/08 02:56 PM
Re: Converting a Lee Enfield into a bigger bore	NitroX	04/08/10 04:42 AM
Re: Converting a Lee Enfield into a bigger bore	RLI	04/08/10 07:42 AM
Re: Converting a Lee Enfield into a bigger bore	Oldbrit	13/09/10 06:10 AM
Re: Converting a Lee Enfield into a bigger bore	WyoJoe	15/09/10 03:56 PM
Re: Converting a Lee Enfield into a bigger bore	DarylS	17/09/10 08:49 AM
Re: Converting a Lee Enfield into a bigger bore	DarylS	11/02/12 09:07 AM
Re: Converting a Lee Enfield into a bigger bore	tinker	11/02/12 02:59 PM
Re: Converting a Lee Enfield into a bigger bore	Homer	11/02/12 04:33 PM
Re: Converting a Lee Enfield into a bigger bore	DarylS	12/02/12 04:15 AM
Re: Converting a Lee Enfield into a bigger bore	Marrakai	03/02/08 08:38 PM
Re: Converting a Lee Enfield into a bigger bore	Bramble	04/02/08 03:16 AM
Re: Converting a Lee Enfield into a bigger bore	DarylS	04/02/08 07:31 AM
Re: Converting a Lee Enfield into a bigger bore	gwh	04/02/08 09:16 AM
Re: Converting a Lee Enfield into a bigger bore	gwh	04/02/08 11:50 AM
Re: Converting a Lee Enfield into a bigger bore	88MauSporter	04/02/08 02:35 PM
Re: Converting a Lee Enfield into a bigger bore	gwh	04/02/08 02:45 PM
Re: Converting a Lee Enfield into a bigger bore	308	04/02/08 07:48 PM
Re: Converting a Lee Enfield into a bigger bore	DarylS	11/02/08 05:27 AM

Extra information

0 registered and 10 anonymous users are browsing this forum.

Moderator:

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 17193

Jump to

NitroExpress.com

Powered by UBB.threads™ 6.5.5

Home | Ezine | Forums | Links | Contact

Copyright 2003 to 2011 - all rights reserved