Home | Ezine | Forums | Links | Contact
NitroExpress.com: Solids: North Fork vs. Barnes

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies


*** Enjoy NitroExpress.com? Participate and join in. ***

Shooting & Reloading - Mausers, Big Bores and others >> Big Bore Rifles

Indy
.224 member


Reged: 23/04/04
Posts: 22
Solids: North Fork vs. Barnes
      09/06/07 03:04 AM

I am debating whether to use 450 grain North Fork solids or 450 grain Barnes solids on an elephant hunt.

"Everybody" says that the North Forks (which look just like G.S.) will penetrate deeper than round nose solids because of their flat point. However, "everybody" does not include Kevin Robertson, who says just the opposite in his book.

Moreover, this North Fork flat point measures about 8mm. While the Barnes monolithic looks more round, it too has a flat point, on the end of its round nose, that mesures about 7mm in diameter. Both bullets have a shoulder like a wadcutter. Barnes solids are easier to load because they have wider (and fewer) crimping grooves. Both shoot equally well in my rifle and get in the 2250--2300 fps range, with Barnes a mite faster. I have heard this is because Barnes solids are a bit undersize.

Since I am, so far, a shooter of paper only with big bores, any experiences would be appreciated.

Post Extras Print Post   Remind Me!     Notify Moderator


Entire topic
Subject Posted by Posted on
* Solids: North Fork vs. Barnes Indy 09/06/07 03:04 AM
. * * Re: Solids: North Fork vs. Barnes Kalunga   09/06/07 04:06 AM
. * * Re: Solids: North Fork vs. Barnes 9.3x57   09/06/07 11:46 AM
. * * Re: Solids: North Fork vs. Barnes 500grains   10/06/07 12:11 PM
. * * Re: Solids: North Fork vs. Barnes Indy   11/06/07 06:59 AM

Extra information
0 registered and 45 anonymous users are browsing this forum.

Moderator:   



Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 2131

Rate this thread

Jump to

Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved