Home | Ezine | Forums | Links | Contact
NitroExpress.com: Anyone have experience with MS 6.5x54 and 9.5x57mm

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies


*** Enjoy NitroExpress.com? Participate and join in. ***

Shooting & Reloading - Mausers, Big Bores and others >> Mannlicher Discussion forum & Archive

Prev_Forum
.333 member


Reged: 25/12/02
Posts: 271
Loc: Web
Anyone have experience with MS 6.5x54 and 9.5x57mm
      29/12/02 03:06 AM

From: Nitro (Original Message) Sent: 2/17/2002 10:22 PM

Does anyone have any experience with the Mannlicher Schoenauer cartridges 6.5x54mm and 9.5x57mm?

The 9.5x57 is also known as the .375 Rimless Nitro Express.

I had a look at a couple of Mannlicher Schoenauer rifles this weekend.

The 9.5mm with a hinged peep sight on the bolt shroud. The 6.5mm has open sights plus is tapped for scope mounts and has a 2.5x Weaver scope in a high set of mounts. Both are in fair to reasonable condition. The bores on visual inspection look OK with no noticeable damage.

The 6.5x54 would make an EXCELLENT general medium game rifle in this classy rifle.

I looked at references on the 9.5mm and it is about 200 fps faster than a 375 Winchester but can take spitzer bullets. I think it would make an excellent Sambar deer brush rifle especially as the rifle is nice an light.

I also bought a laser sight, which I think would go well on the 9.5 mm.

Any comments or knowledge on this rifles, cartridges etc would be appreciated.


--------------------
*****
Message from previous message board

Post Extras Print Post   Remind Me!     Notify Moderator


Entire topic
Subject Posted by Posted on
* Anyone have experience with MS 6.5x54 and 9.5x57mm Prev_Forum 29/12/02 03:06 AM
. * * Re: Anyone have experience with MS 6.5x54 and 9.5x57mm ORION   20/12/04 06:46 PM
. * * Re: Anyone have experience with MS 6.5x54 and 9.5x57mm enfieldspares   12/07/07 09:30 AM
. * * Re: Anyone have experience with MS 6.5x54 and 9.5x57mm 333_okh   20/08/07 06:28 AM
. * * Re: Anyone have experience with MS 6.5x54 and 9.5x57mm Nakihunter   03/03/08 04:08 PM
. * * Re: Anyone have experience with MS 6.5x54 and 9.5x57mm escard   03/03/08 11:59 PM
. * * Re: Anyone have experience with MS 6.5x54 and 9.5x57mm 9.3x57   04/03/08 12:37 AM
. * * Re: Anyone have experience with MS 6.5x54 and 9.5x57mm JabaliHunter   04/03/08 10:41 PM
. * * MS 6.5x54 escard   04/03/08 11:41 PM
. * * Re: MS 6.5x54 xausa   05/03/08 01:27 AM
. * * Re: MS 6.5x54 Nakihunter   28/03/08 11:34 AM
. * * Re: Anyone have experience with MS 6.5x54 and 9.5x57mm Nakihunter   04/03/08 01:35 PM
. * * Re: Anyone have experience with MS 6.5x54 and 9.5x57mm 50Calshtr   04/03/08 02:08 PM
. * * Re: Anyone have experience with MS 6.5x54 and 9.5x57mm Marrakai   04/03/08 12:27 AM
. * * Re: Anyone have experience with MS 6.5x54 and 9.5x57mm tinker   12/07/07 12:10 PM
. * * Re: Anyone have experience with MS 6.5x54 and 9.5x57mm kamilaroi   18/12/04 02:22 PM
. * * Re: Anyone have experience with MS 6.5x54 and 9.5x57mm NitroXAdministrator   18/12/04 03:05 PM

Extra information
0 registered and 60 anonymous users are browsing this forum.

Moderator:  CptCurl 



Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating: ****
Thread views: 8103

Rate this thread

Jump to

Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved