Forums.NitroExpress.com

Home | Ezine | Forums | Links | Contact NitroExpress.com: L. C. Smith Questions

*** Enjoy NitroExpress.com? Participate and join in. ***

You are not logged in. [Login]

Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Shooting & Reloading - Mausers, Big Bores and others >> Shotguns

Peterb
.333 member

Reged: 07/07/04
Posts: 288

Re: L. C. Smith Questions
09/11/06 02:01 PM

Check the chamber length. It might be 2 9/16" at that date. If so there will be a slight increase in pressure shooting 2 3/4" loads. This averages about 200 psi. That also increases the rearward force which is tough on the wood behind the locks. Sidelocks crack here. Be sure to keep the rear screws tight. When they loosen, they are a cause for stock cracks. It is wise to remove any oil soaked in the stock. Be sure to have a qualified gunsmith remove the wood. It is a b*tch on LC's. Glass in the stock and there will be no future cracks.

Post Extras

Entire topic
Subject	Posted by	Posted on
L. C. Smith Questions	iwantadouble	04/06/06 12:45 PM
Re: L. C. Smith Questions	Peterb	09/11/06 02:01 PM
Re: L. C. Smith Questions	Yogi000	10/11/06 04:53 AM

Extra information

0 registered and 10 anonymous users are browsing this forum.

Moderator: NitroX

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 2139

Jump to

NitroExpress.com

Home | Ezine | Forums | Links | Contact