Forums.NitroExpress.com

Home | Ezine | Forums | Links | Contact NitroExpress.com: .577 BPE needs the 640 grain

*** Enjoy NitroExpress.com? Participate and join in. ***

You are not logged in. [Login]

Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Double Rifles, Single Shots & Combinations >> Double Rifles

casper50
.400 member

Reged: 18/10/07
Posts: 1380
Loc: Alaska

.577 BPE needs the 640 grain
17/05/24 07:26 PM

I have 10 640 grain 580 diameter bullets that I loaded a couple of today. With the same powder load they shot 6" closer to center than the 535's that I used last week. So I'm looking for some heavier 640ish grain bullets. I've found two molds at Buffalo Arms that cast a 640 grain .580" and a 645 grain .585" hollow base minie bullet. With my problem of no crimp with the .580" last week I'd like to try some of the .585's. Don't want to buy the mold until I know they work though. So I'm looking for some .585" bullets. Seem hard to find.

Post Extras

Entire topic
Subject	Posted by	Posted on
.577 BPE needs the 640 grain	casper50	17/05/24 07:26 PM
Re: .577 BPE needs the 640 grain	LTK	17/05/24 11:29 PM
Re: .577 BPE needs the 640 grain	casper50	18/05/24 12:37 AM
Re: .577 BPE needs the 640 grain	LTK	18/05/24 04:44 AM
Re: .577 BPE needs the 640 grain	3DogMike	19/05/24 12:12 AM
Re: .577 BPE needs the 640 grain	DarylS	19/05/24 05:14 AM
Re: .577 BPE needs the 640 grain	pondoro62	19/05/24 07:02 AM
Re: .577 BPE needs the 640 grain	DarylS	19/05/24 12:08 AM
Re: .577 BPE needs the 640 grain	85lc	18/05/24 03:06 AM
Re: .577 BPE needs the 640 grain	casper50	18/05/24 03:52 AM

Extra information

0 registered and 229 anonymous users are browsing this forum.

Moderator: CptCurl

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 533

Jump to

NitroExpress.com

Home | Ezine | Forums | Links | Contact