Quote:

---

Quote:

---

Quote:

---

Ash

I find another 11x59R cartridge that may be very much like the .445 Grasset Nitro



civilian SFM with a unknown non- magnetic jacketed bullet, same oal like 8x50R Lebel

a shorter brass bullet on a 11x59R with SFM civil headstamp

11x59R blackpowder lead bullet load, lead lost the paper patching in the storms of time



if you reduce rim thickness and diameter of the first round you have the thing. I measure a .439 bullet diameter on the case mouth what will help to reduce pressure in the .451-.454 gras brarrels.

---

But a .439 jacketed bullet down a .446-.451 barrel will shoot with horrid accuracy?
Do you suspect this to be the elusive .445 Nitro? I'm now certain it's like you said - 11mm Gras, smokeless load. Maybe they open the bolt to suit?
No idea on bullet weight/velocity.

Seriously debating on buying one and figuring it out and hunting with it.

---

That ctg. looks so much like the .43 Mauser, for the model 1871 Mauser. The first ones, including the 1871/76 had groove diameters of up to .457". The bullet was .446" and the ctg. case/chamber would not allow a bullet over .446" to be seated in it.
The original 77gr. Black Powder load would slug up the .439" soft lead bullet to give military accuracy of the day. However, when CIL and other makers started producing smokeless loads, still with the .446" bullet, accuracy was VERY disappointing - in the 1871's through 1871/76's.
The model 1884 Mauser, however(same basic action), had barrels with .446" groove diameters & those shot the new smokeless ammo fairly well.
So- if undersied bullets are used, they must be soft lea and be driven by black powder.

---

--------------------
Daryl


"a gun without hammers is like a Spaniel without ears" King George V

Post Extras