Home | Ezine | Forums | Links | Contact
NitroExpress.com: Scope Mounts for Winchester 300 WSM

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies


*** Enjoy NitroExpress.com? Participate and join in. ***

Shooting & Reloading - Mausers, Big Bores and others >> Rifles

starman
.275 member


Reged: 23/08/05
Posts: 53
Loc: nsw
Re: Scope Mounts for Winchester 300 WSM
      19/09/05 07:03 PM

Leupold Dual Dovetailbases and Low rings(0.65") will fit a 2.5-8x Leupold nicely.
Have a look at the latest u.s. GUNS magazine. It has the latest 325WSM set up with this combination on the front page.
I have a 2.5-8x in dual dovetails on a SaM70(22/250)with superlowrings(0.55"). I got the front rings from 2sets of std.superlows.But the superlows/2.5-8x combination may not fit the WSM reciever,because the screws are about 6mm further apart. than the std.SaM70 so the bases may hit the scope.But you may be able to get around that by:
- chamfering the front of the front base and the rear of the rear base.If you could do that, It would look hot!
-The other option is use the longer tubed 1.75-6x or 1.5-5x Leupold with the superlows.
The Conetrol system looks good also.

Edited by starman (19/09/05 07:41 PM)

Post Extras Print Post   Remind Me!     Notify Moderator


Entire topic
Subject Posted by Posted on
* Scope Mounts for Winchester 300 WSM 500Nitro 07/08/05 09:55 AM
. * * Re: Scope Mounts for Winchester 300 WSM HiWall   08/08/05 03:10 PM
. * * Re: Scope Mounts for Winchester 300 WSM 500Nitro   08/08/05 04:45 PM
. * * Re: Scope Mounts for Winchester 300 WSM HiWall   09/08/05 08:33 PM
. * * Re: Scope Mounts for Winchester 300 WSM starman   19/09/05 07:03 PM

Extra information
0 registered and 350 anonymous users are browsing this forum.

Moderator:   



Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 2458

Rate this thread

Jump to

Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved