Forums.NitroExpress.com

Home | Ezine | Forums | Links | Contact NitroExpress.com: CZ 550 stock on BRNO ZKK 602.

*** Enjoy NitroExpress.com? Participate and join in. ***

You are not logged in. [Login]

Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Shooting & Reloading - Mausers, Big Bores and others >> Rifles

AussieNT
.224 member

Reged: 25/11/14
Posts: 1
Loc: Darwin, NT, Australia

Re: CZ 550 stock on BRNO ZKK 602.
30/03/22 02:31 PM

I have put my Brno 602 action into a Bell and Carlson CZ550 magnum stock.
It fit straight in and screwed up out of the box, but i had a gunsmith do a final fit and finish. The action screw holes were ever so slightly off and was worried the action would bare up against the action screw under recoil and wasn't sure on the recoil lug contact. Gunsmith relieved the rear of the stock and made sure the action bedded properly on the front lug. He remarked that it was an easy fit up and was very pleased with the stock and fit, as am I.

Post Extras

Entire topic
Subject	Posted by	Posted on
CZ 550 stock on BRNO ZKK 602.	Woldan	21/03/21 07:23 AM
Re: CZ 550 stock on BRNO ZKK 602.	93x64mm	21/03/21 11:46 AM
Re: CZ 550 stock on BRNO ZKK 602.	Woldan	21/03/21 01:02 PM
Re: CZ 550 stock on BRNO ZKK 602.	93x64mm	21/03/21 05:17 PM
Re: CZ 550 stock on BRNO ZKK 602.	jgrabow	21/03/21 08:48 PM
Re: CZ 550 stock on BRNO ZKK 602.	rpeck	07/03/22 12:47 AM
Re: CZ 550 stock on BRNO ZKK 602.	Ismail82	25/03/22 02:59 PM
Re: CZ 550 stock on BRNO ZKK 602.	DarylS	26/03/22 05:48 AM
Re: CZ 550 stock on BRNO ZKK 602.	AussieNT	30/03/22 02:31 PM

Extra information

0 registered and 52 anonymous users are browsing this forum.

Moderator:

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 3985

Jump to

NitroExpress.com

Home | Ezine | Forums | Links | Contact