Forums.NitroExpress.com

Home | Ezine | Forums | Links | Contact NitroExpress.com: Poor pattern at 40yds

*** Enjoy NitroExpress.com? Participate and join in. ***

You are not logged in. [Login]

Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Shooting & Reloading - Mausers, Big Bores and others >> Shotguns

cr500
.300 member

Reged: 11/10/03
Posts: 215
Loc: Singleton ,Australia

Poor pattern at 40yds
06/08/05 04:00 PM

I pattern tested my Suhl SXS sidelock at 40 yds today with 34gm No5 field loads and noticed that the pattern was very patchy with some areas saturated by shot while other areas a duck could have flown through without being hit. Will backboring and longer forcing cones make much difference at the pattern board when using field loads? I didnt want to spend the bucks if the improvement will only be marginal. Also will the reduction in recoil be noticable? Does backboring or lengthening forcing cones reduce the presure at all to maybe save wear and tear on the gun?

Post Extras

Entire topic
Subject	Posted by	Posted on
Poor pattern at 40yds	cr500	06/08/05 04:00 PM
Re: Poor pattern at 40yds	500Nitro	07/08/05 01:29 AM
Re: Poor pattern at 40yds	cr500	07/08/05 06:28 PM
Re: Poor pattern at 40yds	500Nitro	07/08/05 07:25 PM
Re: Poor pattern at 40yds	cr500	08/08/05 09:38 AM
Re: Poor pattern at 40yds	rgp	09/08/05 08:32 AM
Re: Poor pattern at 40yds	cr500	09/08/05 09:55 AM
Re: Poor pattern at 40yds	500Nitro	09/08/05 10:30 AM
Re: Poor pattern at 40yds	cr500	09/08/05 02:57 PM
Re: Poor pattern at 40yds	500Nitro	10/08/05 01:47 AM
Re: Poor pattern at 40yds	cr500	25/08/05 10:41 AM

Extra information

0 registered and 6 anonymous users are browsing this forum.

Moderator: NitroX

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 1988

Jump to

NitroExpress.com

Home | Ezine | Forums | Links | Contact