Forums.NitroExpress.com

Home | Ezine | Forums | Links | Contact NitroExpress.com: Re-solder Tikka 512 rifle barrel

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies

*** Enjoy NitroExpress.com? Participate and join in. ***

You are not logged in. [Login]

Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Double Rifles, Single Shots & Combinations >> Double Rifles

Russ_Gould
.224 member

Reged: 20/12/06
Posts: 30
Loc: OR, USA

Re: Re-solder Tikka 512 rifle barrel
26/06/21 03:52 AM

Have not seen this happen on the front adjustment, but the mid (vertical) adjustment does occasionally fail in the heavier calibers.

The barrels are designed to bend, to allow them to be adjusted to achieve regulation. Within limits of course.

The joint needs to be resoldered. The mfg used silver solder (braze), I have some of the exact solder here as well as the correct flux they used. I would not recommend low tensile solder, there is a lot of stress on that joint due to barrel vibration.

If you are in TX I can help you, otherwise any competent local smith should be able to handle it (not much different than silver soldering on a sight ramp).

You don't have to reblue but there will be heat damage to the adjacent blueing as this is not low temp solder.

The regulation will need to be redone.

--------------------
http://doublegunhq.com - specializing in fine English, German and American double guns; and http://bigfivehq.com, specializing in safari rifles and hunting safaris

Post Extras

Print Post

Remind Me!

Notify Moderator

Entire topic
Subject	Posted by	Posted on
Re-solder Tikka 512 rifle barrel	jfkid	03/06/21 02:58 PM
Re: Re-solder Tikka 512 rifle barrel	NitroX	03/06/21 03:03 PM
Re: Re-solder Tikka 512 rifle barrel	NitroX	03/06/21 03:04 PM
Re: Re-solder Tikka 512 rifle barrel	NitroX	03/06/21 03:10 PM
Re: Re-solder Tikka 512 rifle barrel	NitroX	03/06/21 03:41 PM
Re: Re-solder Tikka 512 rifle barrel	NitroX	06/06/21 03:01 AM
Re: Re-solder Tikka 512 rifle barrel	NitroX	06/06/21 03:02 AM
Re: Re-solder Tikka 512 rifle barrel	Yochanan	06/06/21 06:54 AM
Re: Re-solder Tikka 512 rifle barrel	DarylS	06/06/21 09:18 AM
Re: Re-solder Tikka 512 rifle barrel	jfkid	10/06/21 05:26 AM
Re: Re-solder Tikka 512 rifle barrel	NitroX	10/06/21 04:10 PM
Re: Re-solder Tikka 512 rifle barrel	3DogMike	11/06/21 01:09 AM
Re: Re-solder Tikka 512 rifle barrel	tinker	10/06/21 05:28 AM
Re: Re-solder Tikka 512 rifle barrel	93x64mm	11/06/21 08:15 AM
Re: Re-solder Tikka 512 rifle barrel	prairie_ghost	11/06/21 09:25 PM
Re: Re-solder Tikka 512 rifle barrel	aromakr	15/06/21 04:54 AM
Re: Re-solder Tikka 512 rifle barrel	3DogMike	16/06/21 02:49 AM
Re: Re-solder Tikka 512 rifle barrel	aromakr	16/06/21 07:44 AM
Re: Re-solder Tikka 512 rifle barrel	Tom_H	16/06/21 08:15 PM
Re: Re-solder Tikka 512 rifle barrel	Russ_Gould	26/06/21 03:52 AM
Re: Re-solder Tikka 512 rifle barrel	Hunter4752001	10/06/21 09:06 AM
Re: Re-solder Tikka 512 rifle barrel	eagle27	03/06/21 03:25 PM

Extra information

0 registered and 69 anonymous users are browsing this forum.

Moderator: CptCurl

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 4015

Jump to

NitroExpress.com

Powered by UBB.threads™ 6.5.5

Home | Ezine | Forums | Links | Contact

Copyright 2003 to 2011 - all rights reserved