Home | Ezine | Forums | Links | Contact
NitroExpress.com: Re-solder Tikka 512 rifle barrel

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies


*** Enjoy NitroExpress.com? Participate and join in. ***
You are not logged in. [Login] Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Double Rifles, Single Shots & Combinations >> Double Rifles
Previous thread Previous   View all threads Index   Next thread Next   Flat Mode Flat  

Tom_H
.333 member


Reged: 13/04/05
Posts: 336
Loc: Southeast, NY
Re: Re-solder Tikka 512 rifle barrel
      16/06/21 08:15 PM

It you still have the gun, any competent smith can handle that.
The saddle is only soldered to the upper barrel so you can put heat on it while the two are together.
If I remember correctly, the ring around the lower barrel is a snug fit but is free so that the barrel can shift with windage and elevation adjustments.
It certainly doesn't compare to a full relay. With the number of builders on this site, I am surprised that nobody else chimed in.
What I would do after it is corrected, is to send it out to get cryo'd and that would probably take care of any stress imparted by heating the barrel up when soldering.
I have seen cryogenic treatment work wonders on a number of guns.

Good luck and sorry about the late reply.

Cheers,

Tom

--------------------
Carbonation without fermentation is tyranny

Post Extras Print Post   Remind Me!     Notify Moderator


Entire topic
Subject Posted by Posted on
* Re-solder Tikka 512 rifle barrel jfkid 03/06/21 02:58 PM
. * * Re: Re-solder Tikka 512 rifle barrel NitroXAdministrator   03/06/21 03:03 PM
. * * Re: Re-solder Tikka 512 rifle barrel NitroXAdministrator   03/06/21 03:04 PM
. * * Re: Re-solder Tikka 512 rifle barrel NitroXAdministrator   03/06/21 03:10 PM
. * * Re: Re-solder Tikka 512 rifle barrel NitroXAdministrator   03/06/21 03:41 PM
. * * Re: Re-solder Tikka 512 rifle barrel NitroXAdministrator   06/06/21 03:01 AM
. * * Re: Re-solder Tikka 512 rifle barrel NitroXAdministrator   06/06/21 03:02 AM
. * * Re: Re-solder Tikka 512 rifle barrel Yochanan   06/06/21 06:54 AM
. * * Re: Re-solder Tikka 512 rifle barrel DarylS   06/06/21 09:18 AM
. * * Re: Re-solder Tikka 512 rifle barrel jfkid   10/06/21 05:26 AM
. * * Re: Re-solder Tikka 512 rifle barrel NitroXAdministrator   10/06/21 04:10 PM
. * * Re: Re-solder Tikka 512 rifle barrel 3DogMike   11/06/21 01:09 AM
. * * Re: Re-solder Tikka 512 rifle barrel tinker   10/06/21 05:28 AM
. * * Re: Re-solder Tikka 512 rifle barrel 93x64mm   11/06/21 08:15 AM
. * * Re: Re-solder Tikka 512 rifle barrel prairie_ghost   11/06/21 09:25 PM
. * * Re: Re-solder Tikka 512 rifle barrel aromakr   15/06/21 04:54 AM
. * * Re: Re-solder Tikka 512 rifle barrel 3DogMike   16/06/21 02:49 AM
. * * Re: Re-solder Tikka 512 rifle barrel aromakr   16/06/21 07:44 AM
. * * Re: Re-solder Tikka 512 rifle barrel Tom_H   16/06/21 08:15 PM
. * * Re: Re-solder Tikka 512 rifle barrel Russ_Gould   26/06/21 03:52 AM
. * * Re: Re-solder Tikka 512 rifle barrel Hunter4752001   10/06/21 09:06 AM
. * * Re: Re-solder Tikka 512 rifle barrel eagle27   03/06/21 03:25 PM

Extra information
0 registered and 30 anonymous users are browsing this forum.

Moderator:  CptCurl 



Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 3998

Rate this thread

Jump to

Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved