Forums.NitroExpress.com

Home | Ezine | Forums | Links | Contact NitroExpress.com: Unknown Large Diameter Bullet Mold

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies

*** Enjoy NitroExpress.com? Participate and join in. ***

You are not logged in. [Login]

Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Shooting & Reloading - Mausers, Big Bores and others >> Cast Bullets

DarylS
.700 member

Reged: 10/08/05
Posts: 26994
Loc: Beautiful British Columbia, Ca...

Re: Unknown Large Diameter Bullet Mold
04/08/20 12:14 PM

4th one. This mould's bullet would actually work very well in up to 100" of rifling twist, but also could work in more modern 34" to 36" rates of twist at 1,200fps to about 1,500fps.(just a guess) It would likely tumble badly in a smoothbore, even though the base is hollow.
If it was my mould and I wanted to shoot it in my 12 bore rifled bl. I would pull the handle off the hollow-base plunger and turn it slightly for a thicker base. That would increase the hoop stress level for the base and make it slightly heavier, up to 600gr.
By thicker base, I am referring to the 6th bullet in the lineup, below.
If the diameter of the tube was .730" and the bullet cast 730", then the base could be solid, likely weighing closer to 700gr. of more. PERFECT!

--------------------
Daryl

"a gun without hammers is like a Spaniel without ears" King George V

Post Extras

Print Post

Remind Me!

Notify Moderator

Entire topic
Subject	Posted by	Posted on
Unknown Large Diameter Bullet Mold	JohnBoy	04/08/20 05:57 AM
Re: Unknown Large Diameter Bullet Mold	Huvius	04/08/20 11:09 AM
Re: Unknown Large Diameter Bullet Mold	DarylS	04/08/20 12:14 PM

Extra information

0 registered and 32 anonymous users are browsing this forum.

Moderator: DarylS

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 2612

Jump to

NitroExpress.com

Powered by UBB.threads™ 6.5.5

Home | Ezine | Forums | Links | Contact

Copyright 2003 to 2011 - all rights reserved