Forums.NitroExpress.com

Home | Ezine | Forums | Links | Contact NitroExpress.com: Two questions about American gunsmithing

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies

*** Enjoy NitroExpress.com? Participate and join in. ***

You are not logged in. [Login]

Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Shooting & Reloading - Mausers, Big Bores and others >> Rifles

Major_Bonkers
.224 member

Reged: 22/05/20
Posts: 10
Loc: London, England

Two questions about American gunsmithing
26/07/20 02:44 AM

I have two questions about American gunsmithing which I hope that someone might be able to answer.

The first relates to the Purdey 'chassis system' - see: https://www.purdey.com/guns-rifles/new-bolt-action-rifle - which is a titanium insert in the stock/ fore-end of the rifle onto which the barrel is screwed (rather than the stock itself). I am sure that I have seen the same system used in America, and if anyone can point me in the right direction I would be most grateful.

Secondly; Border barrels, now Sassen Engineering, is where most British guns are barrelled. However, they are not able to mill the foresight and sling eye onto the barrel when they are milling it; so these bits must me soldered on later. The question that I have is - where can the barrel be milled with the foresight and sling eye inclusive? (I thought that it was Alaska Arms, but it is not on their website).

Post Extras

Print Post

Remind Me!

Notify Moderator

Entire topic
Subject	Posted by	Posted on
Two questions about American gunsmithing	Major_Bonkers	26/07/20 02:44 AM
Re: Two questions about American gunsmithing	tinker	26/07/20 05:52 AM
Re: Two questions about American gunsmithing	Major_Bonkers	27/07/20 09:25 PM

Extra information

0 registered and 232 anonymous users are browsing this forum.

Moderator:

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 1653

Jump to

NitroExpress.com

Powered by UBB.threads™ 6.5.5

Home | Ezine | Forums | Links | Contact

Copyright 2003 to 2011 - all rights reserved