Home | Ezine | Forums | Links | Contact
NitroExpress.com: Can anyone help with this old '98 origins?

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies


*** Enjoy NitroExpress.com? Participate and join in. ***

Shooting & Reloading - Mausers, Big Bores and others >> Mauser Discussion Forum

kuduae
.400 member


Reged: 13/01/10
Posts: 1756
Loc: middle of Germany
Re: Can anyone help with this old '98 origins?
      11/06/20 08:48 PM

This rifle was proofed at the Suhl proofhouse in 1912 as the bore/land (notgroove/bullet!)diameter is marked as 7.8 mm, but the service load info is still given as 2.75 gramm smokeless rifle powder and a steel jacketed bullet. The CROWN + crown/N marks indicate proof using the 4000 atm special proof powder, according to the proof rule of July 23, 1893. The rifle was proofed only once for the 8x57 I cartridge. As it is rebored to 9x57, it lacks the mandatory reproof . So the reboring was probably done about 1920, when the „military“ 8x57 was prohibited and proofhouses were not operating due to revolutionary turmoil.
As the worker’s marks under the receiver show, the action is a Gewehr 98 one of military production, smuggled out of the Erfurt arsenal. A „grey market“ action, sometimes encountered at that time.
The crudely scratched name on the barrel is probably of a former owner. No reputable gunmaker would have signed his gun with such scribbling.
The rifle was once mounted with claw mounts. As the scope was not „liberated“ too in 1945, the now useless bases were removed and the front base dovetail in the receiver ring filled in.

Post Extras Print Post   Remind Me!     Notify Moderator


Entire topic
Subject Posted by Posted on
* Can anyone help with this old '98 origins? Robtattoo 11/06/20 12:15 AM
. * * Re: Can anyone help with this old '98 origins? szihn   11/06/20 01:35 AM
. * * Re: Can anyone help with this old '98 origins? Robtattoo   11/06/20 02:03 AM
. * * Re: Can anyone help with this old '98 origins? NitroXAdministrator   11/06/20 06:13 AM
. * * Re: Can anyone help with this old '98 origins? Robtattoo   11/06/20 07:05 AM
. * * Re: Can anyone help with this old '98 origins? kuduae   11/06/20 08:48 PM
. * * Re: Can anyone help with this old '98 origins? NitroXAdministrator   11/06/20 11:57 PM
. * * Re: Can anyone help with this old '98 origins? Robtattoo   12/06/20 12:57 AM
. * * Re: Can anyone help with this old '98 origins? DarylS   12/06/20 01:06 AM
. * * Re: Can anyone help with this old '98 origins? Robtattoo   12/06/20 04:43 AM
. * * Re: Can anyone help with this old '98 origins? DarylS   12/06/20 07:31 AM
. * * Re: Can anyone help with this old '98 origins? Robtattoo   12/06/20 12:16 PM
. * * Re: Can anyone help with this old '98 origins? DarylS   14/06/20 01:51 AM
. * * Re: Can anyone help with this old '98 origins? Tom_H   17/06/20 02:29 AM
. * * Re: Can anyone help with this old '98 origins? NitroXAdministrator   12/06/20 03:07 PM
. * * Re: Can anyone help with this old '98 origins? lancaster   13/06/20 03:32 PM
. * * Re: Can anyone help with this old '98 origins? 93x64mm   11/06/20 10:43 PM
. * * Re: Can anyone help with this old '98 origins? DarylS   11/06/20 01:52 AM

Extra information
0 registered and 94 anonymous users are browsing this forum.

Moderator:  NitroX 



Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 5552

Rate this thread

Jump to

Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved