Forums.NitroExpress.com

Home | Ezine | Forums | Links | Contact NitroExpress.com: Chamber resleeve advise needed

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies

*** Enjoy NitroExpress.com? Participate and join in. ***

You are not logged in. [Login]

Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Double Rifles, Single Shots & Combinations >> Single Shots & Combination Guns

Hendo
.224 member

Reged: 23/05/18
Posts: 45
Loc: South Australia

Chamber resleeve advise needed
28/05/20 02:57 PM

Hi All, I have recently acquired an interesting little single shot, falling block action rifle chambered for .300 rook.
It has Belgium proof marks and has been reblued at some stage in its busy life. Unfortunately, the over enthusiastic polishing has left no hint of who the manufacturer is, (the proof marks are under the forearm, the only part of the octagonal barrel that's been left alone).

It looks like a previous owner has run out of Rook ammo and used something very much shorter (32 Colt??) because the chamber is badly eroded about halfway down , making it very difficult to eject a spent case.
My choices are either (1) resleeve the whole thing to 32-20 or more likely 25-25, a very costly exercise. or (2) find a gunsmith in Australia who can resleeve the chamber in the original cartridge chambering. This is preferred because , apart from a small patch of corrosion, the rifling looks quite good. and half the fun of these old workhorses is shooting them as they were originally.
So my question, Does anyone know of or can recommend a gunsmith in Australia who does this sort of work ie resleeving chambers

--------------------
.

Post Extras

Print Post

Remind Me!

Notify Moderator

Entire topic
Subject	Posted by	Posted on
Chamber resleeve advise needed	Hendo	28/05/20 02:57 PM
Re: Chamber resleeve advise needed	Hendo	28/05/20 03:31 PM
Re: Chamber resleeve advise needed	Hendo	28/05/20 03:33 PM
Re: Chamber resleeve advise needed	93x64mm	28/05/20 10:33 PM
Re: Chamber resleeve advise needed	DoubleD	29/05/20 01:33 AM
Re: Chamber resleeve advise needed	lancaster	29/05/20 03:37 AM
Re: Chamber resleeve advise needed	Huvius	29/05/20 09:16 AM
Re: Chamber resleeve advise needed	500Boswell	30/05/20 08:04 AM

Extra information

0 registered and 41 anonymous users are browsing this forum.

Moderator: Huvius

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 2953

Jump to

NitroExpress.com

Powered by UBB.threads™ 6.5.5

Home | Ezine | Forums | Links | Contact

Copyright 2003 to 2011 - all rights reserved