Home | Ezine | Forums | Links | Contact
NitroExpress.com: Fraser bolt handle

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies


*** Enjoy NitroExpress.com? Participate and join in. ***

Shooting & Reloading - Mausers, Big Bores and others >> Mauser Discussion Forum

szihn
.400 member


Reged: 24/06/07
Posts: 2101
Loc: Wind River Valley, Wyoming
Re: Fraser bolt handle
      24/05/18 11:50 PM

Metal is exactly correct in the best way to attach this kind of bolt, (if you don't weld instead)

Remember that the only thing you need to concern yourself with on a 93, 94 95 or 96 Mauser action is the cam surface. Nothing other than the cams need to be hard on the rear of any of these Mausers. It's easy to weld or braze the new bolt on and then come back and re-harden the cam surface.

To do that you simply spot heat the area to medium red and quench in brine. Polish to bright metal and then gently heat the bolt body about 1" in front of your spot, and let the temper color run backwards until you get a straw color over the hardened area. Re-quench and re polish. Done.

Post Extras Print Post   Remind Me!     Notify Moderator


Entire topic
Subject Posted by Posted on
* Fraser bolt handle prairie_ghost 23/05/18 01:08 PM
. * * Re: Fraser bolt handle metal   24/05/18 02:48 PM
. * * Re: Fraser bolt handle szihn   24/05/18 11:50 PM

Extra information
0 registered and 44 anonymous users are browsing this forum.

Moderator:  NitroX 



Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 2102

Rate this thread

Jump to

Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved