Home | Ezine | Forums | Links | Contact
NitroExpress.com: Looking in the US for someone to do cut rifling on a blank

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies


*** Enjoy NitroExpress.com? Participate and join in. ***

Double Rifles, Single Shots & Combinations >> Building Double Rifles & Gunsmithing

Tom_H
.333 member


Reged: 13/04/05
Posts: 334
Loc: Southeast, NY
Looking in the US for someone to do cut rifling on a blank
      14/11/17 08:18 AM

I'm sure that someone has a source for this.

I have a 13ga barrel from a greener gp that I would like to have rifled to a 12ga groove.

Twist in the 60's.

Thanks

Tom

--------------------
Carbonation without fermentation is tyranny

Post Extras Print Post   Remind Me!     Notify Moderator


Entire topic
Subject Posted by Posted on
* Looking in the US for someone to do cut rifling on a blank Tom_H 14/11/17 08:18 AM
. * * Re: Looking in the US for someone to do cut rifling on a blank MikeRowe   14/11/17 11:17 AM
. * * Re: Looking in the US for someone to do cut rifling on a blank Tom_H   15/11/17 01:55 PM
. * * Re: Looking in the US for someone to do cut rifling on a blank Tom_H   20/11/17 01:43 AM

Extra information
0 registered and 8 anonymous users are browsing this forum.

Moderator:  CptCurl 



Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 1689

Rate this thread

Jump to

Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved