Forums.NitroExpress.com

Home | Ezine | Forums | Links | Contact NitroExpress.com: .300 H&H range performance + some..

*** Enjoy NitroExpress.com? Participate and join in. ***

You are not logged in. [Login]

Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Shooting & Reloading - Mausers, Big Bores and others >> Mauser Discussion Forum

rigbymauser
.400 member

Reged: 15/05/05
Posts: 1972
Loc: Denmark

Re: .300 H&H range performance + some..
04/04/17 05:55 AM

Thanks!. I will go ahead and try out a Barnes TSX 130grain next time, but the ABLR looks promising.

Next time a small batch of loads around 70grains will be in session. My former barrel(chamber) took 73grain of MRP and 150grain bullet @ 1000 m/sec. The loads here is the very first handloads. I believe a ½ grain will get to close to 1000 m/sec which indicate this chamber and free-bore might be on the tight side. Test different COLs might just be the trick. I have experienced before seating the bullet 1mm +/- from nominal COL can squeeze a group from 1½" to ½". I hope the .270Wby perform best with 150grain and no lighter. I have my 6,5x68Schüler which ought to fill the 100-120grain bullet area.

Post Extras

Entire topic
Subject	Posted by	Posted on
.300 H&H range performance + some..	rigbymauser	03/04/17 06:32 AM
Re: .300 H&H range performance + some..	DarylS	03/04/17 07:24 AM
Re: .300 H&H range performance + some..	Gen_Hicks	03/04/17 01:43 PM
Re: .300 H&H range performance + some..	rigbymauser	04/04/17 05:55 AM

Extra information

1 registered and 310 anonymous users are browsing this forum.

Moderator: NitroX

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 2589

Jump to

NitroExpress.com

Home | Ezine | Forums | Links | Contact