Forums.NitroExpress.com

Home | Ezine | Forums | Links | Contact NitroExpress.com: repairing a drilling

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies

*** Enjoy NitroExpress.com? Participate and join in. ***

You are not logged in. [Login]

Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Double Rifles, Single Shots & Combinations >> Single Shots & Combination Guns

szihn
.400 member

Reged: 24/06/07
Posts: 2121
Loc: United States

repairing a drilling
15/02/17 07:31 AM

Hello all.
I am doing a repair on a Drilling that is 2 rifles over a 20 ga shotgun. The rifle barrels are chambered in a shell I can't seem to identify.
There are markings on the underside, but I am not sure if I am reading them correctly.
They look like10.6m
60.

But they may be 1C6m
60

The casting of the chamber itself gives me these measurements.

Rim diameter .540"
Rim Thickness .070"
Shell web in front of rim. .479"
Case mouth .470"
Shell length 2.365"
Bullet diameter .447" Aprox. Taken from throat in front of chamber.
Bore diameter .425"

Can anyone tell me what I have here, and if brass is available?

Note, in the writing above I tried to make the 60 come out underneath the line s reading 1C.6m and 10.6m, but the computer will not show them that way.

I hope this is understandable,

Edited by szihn (15/02/17 07:36 AM)

Post Extras

Print Post

Remind Me!

Notify Moderator

Entire topic
Subject	Posted by	Posted on
repairing a drilling	szihn	15/02/17 07:31 AM
Re: repairing a drilling	Wayne59	15/02/17 11:37 AM
Re: repairing a drilling	fuhrmann	15/02/17 07:25 PM
Re: repairing a drilling	szihn	17/02/17 03:42 AM
Re: repairing a drilling	fuhrmann	18/02/17 12:53 AM
Re: repairing a drilling	sharps4590	18/02/17 12:04 AM

Extra information

0 registered and 45 anonymous users are browsing this forum.

Moderator: Huvius

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 2640

Jump to

NitroExpress.com

Powered by UBB.threads™ 6.5.5

Home | Ezine | Forums | Links | Contact

Copyright 2003 to 2011 - all rights reserved