Home | Ezine | Forums | Links | Contact
NitroExpress.com: 7x64mm

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies


*** Enjoy NitroExpress.com? Participate and join in. ***

Shooting & Reloading - Mausers, Big Bores and others >> Rifles

PatagonHunter
.333 member


Reged: 20/01/06
Posts: 255
Loc: Bariloche, Patagonia Argentina
Re: 7x64mm
      27/10/16 08:53 PM

Hello,

I had a very nice (perhaps the BEST MADE factory rifle I have had) Mannlicher-Schoenauer GK 7x64. With a great Hensoldt Diavari 1,5-6x36 scope. Mounted in a lateral Gastinne-Renette rotary mount. Truly unique, strong and very well made mount from the sixties.
I used mainly RWS H-Mantel and TIG (173 and 162/177 grs respectively). Plus my own reloads using these RWS brass and 6 boxes of 280 Remington virgin brass I bought. Only two steps to do to get 7x64 cases from those .280 Rem: 1- Pass the .280 cases in the 7x64 full length sizing die, an 2- Cut the extra length of the neck from the .280. From there, use the cases as 7x64 original ones. Never had a failure. Anyway, I anneal the necks/shoulders after two shoots.
Taking in consideration the individual rifles and cases, in my experience, the same loads can be used in both cartridges.

Good luck!

PH

Post Extras Print Post   Remind Me!     Notify Moderator


Entire topic
Subject Posted by Posted on
* 7x64mm pacecars 27/10/16 09:21 AM
. * * Re: 7x64mm DarylS   27/10/16 09:29 AM
. * * Re: 7x64mm eagle27   27/10/16 04:45 PM
. * * Re: 7x64mm PatagonHunter   27/10/16 08:53 PM

Extra information
0 registered and 610 anonymous users are browsing this forum.

Moderator:   



Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 1032

Rate this thread

Jump to

Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved