Forums.NitroExpress.com

Good Day All:

Broke my elbow last year in September, had the plate and six screws removed last week and now on the mend.

Can't shoot but I can still look and touch and slug barrels.

So I'm killing time and figured I'd finally slug the bores on my Baikal sxs in 45-70. Turns out both barrels come in at .456" land to land and .450" groove to groove. When running the slugs down from the breach, I needed to tap the rod with a hammer for approximately the first eight inches; after that, I could push the rod and slug out of the rest of the bore with moderate hand force.

Have a friend casting some 350 grain flat nose round point bullets. Going to have them sized to .458".

Anybody else slug their bores and what did you get.

Kind regards,

carpediem

--------------------
Life should NOT be a journey to the grave with the intention of arriving safely in an attractive and well-preserved body, but rather to skid in sideways-Chrdonnay in one hand-Chocolate in the other-body thoroughly used up, totally worn out and screaming "WHOO-HOO, WHAT A RIDE!!"

Post Extras