Forums.NitroExpress.com

Home | Ezine | Forums | Links | Contact NitroExpress.com: Questions about adding lead to the stock--

*** Enjoy NitroExpress.com? Participate and join in. ***

You are not logged in. [Login]

Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Shooting & Reloading - Mausers, Big Bores and others >> Big Bore Rifles

csutton7
.275 member

Reged: 17/02/05
Posts: 70
Loc: SF, CA

Re: Questions about adding lead to the stock--
30/03/05 12:55 PM

Ray--too late--I drilled three 1/4" holes in the 3 areas where the lead was moving and filled it with foam (I didn't want to remove the recoil pad)--the epoxy(or whatever was used)and pellets were moving around and some pellets fell out--all different sizes of pellets--after I drilled the holes you could see the whole gob move back and forth, but no more--I may end up with a Brockman's or another McMillan in the near future, but at least I learned a few things and with the stock not being perfect in the first place it didn't make sense to send it to anyone to muck with---I'll keep a close eye on it while shooting it---chris

Post Extras

Entire topic
Subject	Posted by	Posted on
Questions about adding lead to the stock--	csutton7	16/03/05 10:38 PM
Re: Questions about adding lead to the stock--	510Wells	17/03/05 12:35 PM
Re: Questions about adding lead to the stock--	Eric	17/03/05 03:42 AM
Re: Questions about adding lead to the stock--	csutton7	17/03/05 10:08 AM
Re: Questions about adding lead to the stock--	new_guy	17/03/05 12:51 PM
Re: Questions about adding lead to the stock--	csutton7	17/03/05 05:45 PM
Re: Questions about adding lead to the stock--	atkinson6	30/03/05 06:37 AM
Re: Questions about adding lead to the stock--	csutton7	30/03/05 12:55 PM

Extra information

0 registered and 561 anonymous users are browsing this forum.

Moderator:

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 2136

Jump to

NitroExpress.com

Home | Ezine | Forums | Links | Contact