Forums.NitroExpress.com

Home | Ezine | Forums | Links | Contact NitroExpress.com: Scope bases for a Heym SR20L

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies

*** Enjoy NitroExpress.com? Participate and join in. ***

You are not logged in. [Login]

Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Shooting & Reloading - Mausers, Big Bores and others >> Rifles

rpeck

Reged: 06/12/13
Posts: 435
Loc: Canada

Re: Scope bases for a Heym SR20L
13/07/16 03:14 AM

I was almost correct...Its close to being the same as a Mauser 98..real close, but just enough difference to cause all sorts of scope alignment problems. These are problems that wouldn't arise with the Redfield mounts because they can compensate for slight errors in alignment. So the Redfield mount for a Heym SR20 will fit a Mauser 98.

Anyway, I finally figured it out...good thing I have a lot of various Weaver and Weaver-type alloy and steel bases....it was an endless mix and match and I finally got it sorted, but it took time...For the front base I used a steel Warne Maxima Weaver-style base for a Mauser 98 (its lower than the standard Weaver M-98 base). For the rear I used a #55 alloy Weaver base, the same as for an HVA small ring Mauser. They came out to be exactly the same height, parallel with the receiver.

I could go for EAW or other European mounts, but they are generally too high for me.

Edited by rpeck (13/07/16 03:18 AM)

Post Extras

Print Post

Remind Me!

Notify Moderator

Entire topic
Subject	Posted by	Posted on
Scope bases for a Heym SR20L	rpeck	02/04/16 05:35 AM
Re: Scope bases for a Heym SR20L	HeymSR20	07/06/16 03:12 AM
Re: Scope bases for a Heym SR20L	rpeck	13/07/16 03:14 AM

Extra information

0 registered and 554 anonymous users are browsing this forum.

Moderator:

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 1374

Jump to

NitroExpress.com

Powered by UBB.threads™ 6.5.5

Home | Ezine | Forums | Links | Contact

Copyright 2003 to 2011 - all rights reserved