Forums.NitroExpress.com

Home | Ezine | Forums | Links | Contact NitroExpress.com: My Model 46 Husqvarna in 9.3 X 57

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies

*** Enjoy NitroExpress.com? Participate and join in. ***

You are not logged in. [Login]

Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Shooting & Reloading - Mausers, Big Bores and others >> Mauser Discussion Forum

sharps4590
.333 member

Reged: 09/03/16
Posts: 250
Loc: Missouri Ozarks

Re: My Model 46 Husqvarna in 9.3 X 57
19/06/16 09:29 PM

I MAY have found the reason the medium burn powders were acting so goofy with the cast bullet....which still doesn't make sense to me as it's fine with the jacketed bullets unless the difference in bullet diameter mattered...which evidently it does. With the formed brass the bolt always hit a sticky spot at the mid-point of opening the bolt. It didn't matter if the cartridge had been fired and that hard spot was not present when the chamber was empty. I suspected the brass but even with spotting compound couldn't really see much interference. After dinking with this for about a week I finally decided to resize the brass in my 9 X 57 die then open the case neck back to 9.3 with just the expanding button in the 9.3 die. Problem solved. So...I fired a few rounds then full length sized them in the 9.3 die. Same issue arose. Seemed obvious to me the die was too long for the chamber. Ground a few thousandths off the bottom of the sizing die and all is well in Ozark land. Now to try some cast bullet loads with the medium burners!

--------------------
Jesus said, "I am the way the truth and the life. No one comes to the Father but through me." John14:6

Post Extras

Print Post

Remind Me!

Notify Moderator

Entire topic
Subject	Posted by	Posted on
My Model 46 Husqvarna in 9.3 X 57	sharps4590	21/04/16 12:48 AM
Re: My Model 46 Husqvarna in 9.3 X 57	DarylS	21/04/16 12:56 AM
Re: My Model 46 Husqvarna in 9.3 X 57	sharps4590	21/04/16 01:55 AM
Re: My Model 46 Husqvarna in 9.3 X 57	Iowa_303s	21/04/16 09:17 AM
Re: My Model 46 Husqvarna in 9.3 X 57	Homer	21/04/16 06:46 PM
Re: My Model 46 Husqvarna in 9.3 X 57	sharps4590	21/04/16 09:50 PM
Re: My Model 46 Husqvarna in 9.3 X 57	DarylS	22/04/16 01:36 AM
Re: My Model 46 Husqvarna in 9.3 X 57	D_the_D	22/04/16 03:25 AM
Re: My Model 46 Husqvarna in 9.3 X 57	Iowa_303s	22/04/16 03:36 AM
Re: My Model 46 Husqvarna in 9.3 X 57	sharps4590	22/04/16 06:54 AM
Re: My Model 46 Husqvarna in 9.3 X 57	DarylS	23/04/16 02:22 AM
Re: My Model 46 Husqvarna in 9.3 X 57	sharps4590	23/04/16 07:01 AM
Re: My Model 46 Husqvarna in 9.3 X 57	lancaster	24/04/16 08:21 PM
Re: My Model 46 Husqvarna in 9.3 X 57	sharps4590	28/04/16 03:15 AM
Re: My Model 46 Husqvarna in 9.3 X 57	DarylS	28/04/16 12:43 PM
Re: My Model 46 Husqvarna in 9.3 X 57	sharps4590	28/04/16 09:36 PM
Re: My Model 46 Husqvarna in 9.3 X 57	lonewulf	28/04/16 11:56 PM
Re: My Model 46 Husqvarna in 9.3 X 57	D_the_D	29/04/16 07:36 AM
Re: My Model 46 Husqvarna in 9.3 X 57	Igorrock	29/04/16 12:53 PM
Re: My Model 46 Husqvarna in 9.3 X 57	D_the_D	29/04/16 01:02 PM
Re: My Model 46 Husqvarna in 9.3 X 57	sharps4590	29/04/16 08:21 PM
Re: My Model 46 Husqvarna in 9.3 X 57	Igorrock	29/04/16 11:13 PM
Re: My Model 46 Husqvarna in 9.3 X 57	sharps4590	30/04/16 02:14 AM
Re: My Model 46 Husqvarna in 9.3 X 57	DarylS	30/04/16 02:26 AM
Re: My Model 46 Husqvarna in 9.3 X 57	Wanabebwana	08/06/16 10:21 AM
Re: My Model 46 Husqvarna in 9.3 X 57	sharps4590	10/06/16 09:58 PM
Re: My Model 46 Husqvarna in 9.3 X 57	DarylS	11/06/16 12:43 AM
Re: My Model 46 Husqvarna in 9.3 X 57	sharps4590	11/06/16 06:13 AM
Re: My Model 46 Husqvarna in 9.3 X 57	DarylS	11/06/16 08:26 AM
Re: My Model 46 Husqvarna in 9.3 X 57	sharps4590	11/06/16 07:37 PM
Re: My Model 46 Husqvarna in 9.3 X 57	DarylS	12/06/16 02:15 AM
Re: My Model 46 Husqvarna in 9.3 X 57	sharps4590	12/06/16 09:42 PM
Re: My Model 46 Husqvarna in 9.3 X 57	DarylS	13/06/16 12:23 AM
Re: My Model 46 Husqvarna in 9.3 X 57	sharps4590	19/06/16 09:29 PM
Re: My Model 46 Husqvarna in 9.3 X 57	sharps4590	30/04/16 02:46 AM
Re: My Model 46 Husqvarna in 9.3 X 57	D_the_D	30/04/16 05:19 AM
Re: My Model 46 Husqvarna in 9.3 X 57	sharps4590	30/04/16 06:41 AM
Re: My Model 46 Husqvarna in 9.3 X 57	D_the_D	30/04/16 10:19 AM
Re: My Model 46 Husqvarna in 9.3 X 57	DarylS	30/04/16 10:55 AM
Re: My Model 46 Husqvarna in 9.3 X 57	DarylS	30/04/16 02:04 PM
Re: My Model 46 Husqvarna in 9.3 X 57	D_the_D	30/04/16 03:52 PM
Re: My Model 46 Husqvarna in 9.3 X 57	sharps4590	30/04/16 09:47 PM
Re: My Model 46 Husqvarna in 9.3 X 57	DarylS	01/05/16 12:24 AM
Re: My Model 46 Husqvarna in 9.3 X 57	sharps4590	01/05/16 02:16 AM
Re: My Model 46 Husqvarna in 9.3 X 57	DarylS	29/04/16 12:31 AM

Extra information

0 registered and 94 anonymous users are browsing this forum.

Moderator: NitroX

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 15154

Jump to

NitroExpress.com

Powered by UBB.threads™ 6.5.5

Home | Ezine | Forums | Links | Contact

Copyright 2003 to 2011 - all rights reserved