Forums.NitroExpress.com

Home | Ezine | Forums | Links | Contact NitroExpress.com: making 6,5x53R brass

*** Enjoy NitroExpress.com? Participate and join in. ***

You are not logged in. [Login]

Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Shooting & Reloading - Mausers, Big Bores and others >> Mannlicher Discussion forum & Archive

lancaster
.470 member

Reged: 06/05/08
Posts: 9101
Loc: There's a lighthouse in the mi...

Re: making 6,5x53R brass
02/05/15 09:28 PM

so its done
brass trimmed, base lathe turned, neck and shoulder again anealed

see the brass became very hard again after I swage it down so anealing it again was necessary. little bit fireforming will be anyway because the 303 should is smaller than the .256 Mannlicher.

use my old 12 ga RCBS die set for primming, is just a toolbox for doing anything you can not do with the common stuff. to bad they dont make this dies anymore.

working with LR primer is boring

--------------------
Norwegian hunter misses moose, shoots man on toilet
.
bringing civilisation to the barbarians

Edited by lancaster (03/05/15 12:43 AM)

Post Extras

Entire topic
Subject	Posted by	Posted on
making 6,5x53R brass	lancaster	27/04/15 10:28 PM
Re: making 6,5x53R brass	DarylS	28/04/15 12:58 AM
Re: making 6,5x53R brass	Huvius	28/04/15 04:22 AM
Re: making 6,5x53R brass	lancaster	28/04/15 05:25 AM
Re: making 6,5x53R brass	93x64mm	28/04/15 06:04 AM
Re: making 6,5x53R brass	Waidmannsheil	28/04/15 06:11 AM
Re: making 6,5x53R brass	Ash	28/04/15 06:50 AM
Re: making 6,5x53R brass	lancaster	29/04/15 12:46 AM
Re: making 6,5x53R brass	Carpetsahib	30/04/15 04:24 AM
Re: making 6,5x53R brass	Ireload2	01/05/15 03:53 PM
Re: making 6,5x53R brass	lancaster	02/05/15 09:28 PM
Re: making 6,5x53R brass	Sarg	03/05/15 07:47 AM
Re: making 6,5x53R brass	lancaster	03/05/15 12:58 PM
Re: making 6,5x53R brass	Sarg	29/04/15 06:24 AM
Re: making 6,5x53R brass	Marrakai	29/04/15 11:45 PM

Extra information

0 registered and 18 anonymous users are browsing this forum.

Moderator: CptCurl

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 13002

Jump to

NitroExpress.com

Home | Ezine | Forums | Links | Contact