Forums.NitroExpress.com

Home | Ezine | Forums | Links | Contact NitroExpress.com: making 6,5x53R brass

*** Enjoy NitroExpress.com? Participate and join in. ***

You are not logged in. [Login]

Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Shooting & Reloading - Mausers, Big Bores and others >> Mannlicher Discussion forum & Archive

lancaster
.470 member

Reged: 06/05/08
Posts: 9034
Loc: There's a lighthouse in the mi...

making 6,5x53R brass
27/04/15 10:28 PM

my 6,5x54MS die set( a 6,5x53R rimless) came today and so I start making 6,5x53R out of 303 Brit military brass. I was feeling - after years of reloading you have it in the finger tips - and seeing the shoulder of the 303 brass was a little bit brittle so first step was full length with a 308 Winchester die. this sets the shoulder back and was than followed by a 6,5x57 full length die for giving the neck a good start.

from left to right
303
303 shoulder collapsed
fl resized in 308 Win.
fl resized in 6,5x57
fl resized in 6,5x54MS
cut to 53,5mm
original 6,5x53R

this way I lost only one other case from 150 when the neck was sticking in the die

hope this could help, you can take a 6,5x55 FL die also

--------------------
Norwegian hunter misses moose, shoots man on toilet
.
bringing civilisation to the barbarians

Edited by lancaster (27/04/15 10:29 PM)

Post Extras

Entire topic
Subject	Posted by	Posted on
making 6,5x53R brass	lancaster	27/04/15 10:28 PM
Re: making 6,5x53R brass	DarylS	28/04/15 12:58 AM
Re: making 6,5x53R brass	Huvius	28/04/15 04:22 AM
Re: making 6,5x53R brass	lancaster	28/04/15 05:25 AM
Re: making 6,5x53R brass	93x64mm	28/04/15 06:04 AM
Re: making 6,5x53R brass	Waidmannsheil	28/04/15 06:11 AM
Re: making 6,5x53R brass	Ash	28/04/15 06:50 AM
Re: making 6,5x53R brass	lancaster	29/04/15 12:46 AM
Re: making 6,5x53R brass	Carpetsahib	30/04/15 04:24 AM
Re: making 6,5x53R brass	Ireload2	01/05/15 03:53 PM
Re: making 6,5x53R brass	lancaster	02/05/15 09:28 PM
Re: making 6,5x53R brass	Sarg	03/05/15 07:47 AM
Re: making 6,5x53R brass	lancaster	03/05/15 12:58 PM
Re: making 6,5x53R brass	Sarg	29/04/15 06:24 AM
Re: making 6,5x53R brass	Marrakai	29/04/15 11:45 PM

Extra information

0 registered and 132 anonymous users are browsing this forum.

Moderator: CptCurl

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 12885

Jump to

NitroExpress.com

Home | Ezine | Forums | Links | Contact