Home | Ezine | Forums | Links | Contact
NitroExpress.com: 375/303 Axite Mauser

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies


*** Enjoy NitroExpress.com? Participate and join in. ***
You are not logged in. [Login] Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Shooting & Reloading - Mausers, Big Bores and others >> Mauser Forum Photos & Archive
Previous thread Previous   View all threads Index   Next thread Next   Flat Mode Flat  

radin
.275 member


Reged: 04/08/10
Posts: 93
Loc: Pennsylvania
Re: 375/303 Axite Mauser
      21/11/14 09:32 AM

Hi Folks

I have recently had the opportunity to shoot my rifle on the range . At 100 yards , benched , it shot about 3 inches to the left with a 3 inch group at 9 o'clock position . The cheek weld is hard to do due to the height of the eye cup . Since it is a take down , I might have not tightened the barrel enough accounting for the 3 inch left on the indexing mark .

The only markings on the scope are on the mounting rail above with Bland's address and on the top of the elevation dial . 100/300 , 200 , 300 , etc out to 1000 and "for 375/303 Axite" .


Again , thank you all for the reply(s), you are all an amazing source of information . Jim

Post Extras Print Post   Remind Me!     Notify Moderator


Entire topic
Subject Posted by Posted on
* 375/303 Axite Mauser radin 16/02/14 01:40 AM
. * * Re: 375/303 Axite Mauser lancaster   16/02/14 02:17 AM
. * * Re: 375/303 Axite Mauser radin   16/02/14 03:29 AM
. * * Re: 375/303 Axite Mauser Huvius   16/02/14 03:40 AM
. * * Re: 375/303 Axite Mauser dons   16/02/14 03:49 AM
. * * Re: 375/303 Axite Mauser radin   16/02/14 04:25 AM
. * * Re: 375/303 Axite Mauser chapmen   17/02/14 07:17 PM
. * * Re: 375/303 Axite Mauser Sville   17/02/14 07:53 PM
. * * Re: 375/303 Axite Mauser radin   20/02/14 07:51 AM
. * * Re: 375/303 Axite Mauser Igorrock   20/02/14 03:58 PM
. * * Re: 375/303 Axite Mauser radin   21/02/14 11:45 AM
. * * Re: 375/303 Axite Mauser Old_Glass   24/09/14 10:55 AM
. * * Re: 375/303 Axite Mauser Old_Glass   01/10/14 05:39 PM
. * * Re: 375/303 Axite Mauser Carpetsahib   06/10/14 12:00 PM
. * * Re: 375/303 Axite Mauser Huvius   19/11/14 12:42 PM
. * * Re: 375/303 Axite Mauser lancaster   19/11/14 01:38 PM
. * * Re: 375/303 Axite Mauser radin   21/11/14 09:32 AM

Extra information
0 registered and 13 anonymous users are browsing this forum.

Moderator:  CptCurl 



Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 9497

Rate this thread

Jump to

Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved