Forums.NitroExpress.com

Home | Ezine | Forums | Links | Contact NitroExpress.com: Using PB projectiles designed for PP, as GC non PP

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies

*** Enjoy NitroExpress.com? Participate and join in. ***

You are not logged in. [Login]

Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Shooting & Reloading - Mausers, Big Bores and others >> Cast Bullets

DarylS
.700 member

Reged: 10/08/05
Posts: 26524
Loc: Beautiful British Columbia, Ca...

Re: Using PB projectiles designed for PP, as GC non PP
21/08/14 01:33 AM

The pointed bullet is the Schmitzer bullet Lyman #457658DV - designed for long range shooting, with a BC in the .4's. It is amazingly accurate at 506gr. in my alloy, just as the Lyman RN #457125, is amazingly accurate. They shoot virtually identically in my 18" twist 35" GM barrel's Sharps.

A week ago, I was out at the range with a friend who was getting his Rolling Block ready for rendezvous this coming week. His last loads tested came together - 60gr. 2f GOEX (.100" compression), wax-paper disk, 1/8" SPG lube wad, wax paper disk, 525gr. RN(#457125) (30:1), the bullet lubed with SPG as well.

2 consecutive groups off the bags at 100 meters - both were 1.5" centre to centre - shot dirty - no blowing between shots. ALL the fouling pushed out the bore with one dry patch. Len has an inexpensive tang sight coupled with an inexpensive Lyman aperture front.

Note the large capacity square grease grooves on both bullets designed specifically for shooting black powder. Of course, they work well with smokeless powders as well, but usually require an un-side-down gas check (cup-down on powder) or a 1/10" hard card wad for it's base protection.

The pointed bullets (& RN's) shoot 1" to 1.5" in my own Sharps (apertures), loaded identically to the above load listed, except I use Swiss 1 1/2F powder now. I used to use GOEX with the same accuracy results at 100 meters, however the shot to shot strings are closer with Swiss powder, thus the long range accuracy has the potential to be much improved.

--------------------
Daryl

"a gun without hammers is like a Spaniel without ears" King George V

Post Extras

Print Post

Remind Me!

Notify Moderator

Entire topic
Subject	Posted by	Posted on
Using PB projectiles designed for PP, as GC non PP	eljefedouble	27/01/14 12:48 AM
Re: Using PB projectiles designed for PP, as GC non PP	Huvius	27/01/14 02:05 AM
Re: Using PB projectiles designed for PP, as GC non PP	eljefedouble	27/01/14 02:18 PM
Re: Using PB projectiles designed for PP, as GC non PP	DarylS	27/01/14 06:23 AM
Re: Using PB projectiles designed for PP, as GC non PP	eljefedouble	27/01/14 02:39 PM
Re: Using PB projectiles designed for PP, as GC non PP	93x64mm	27/01/14 04:25 PM
Re: Using PB projectiles designed for PP, as GC non PP	93x64mm	27/01/14 04:45 PM
Re: Using PB projectiles designed for PP, as GC non PP	Oldbrit	27/01/14 08:54 PM
Re: Using PB projectiles designed for PP, as GC non PP	DarylS	28/01/14 03:40 AM
Re: Using PB projectiles designed for PP, as GC non PP	eljefedouble	28/01/14 06:53 PM
Re: Using PB projectiles designed for PP, as GC non PP	gungadoug	29/03/14 11:51 PM
Re: Using PB projectiles designed for PP, as GC non PP	DarylS	30/03/14 05:22 AM
Re: Using PB projectiles designed for PP, as GC non PP	AFRO408	11/08/14 08:21 AM
Re: Using PB projectiles designed for PP, as GC non PP	DarylS	11/08/14 09:34 AM
Re: Using PB projectiles designed for PP, as GC non PP	eljefedouble	11/08/14 08:03 PM
Re: Using PB projectiles designed for PP, as GC non PP	AFRO408	12/08/14 10:03 AM
Re: Using PB projectiles designed for PP, as GC non PP	eljefedouble	12/08/14 11:00 AM
Re: Using PB projectiles designed for PP, as GC non PP	DarylS	12/08/14 11:30 AM
Re: Using PB projectiles designed for PP, as GC non PP	eljefedouble	20/08/14 12:42 PM
Re: Using PB projectiles designed for PP, as GC non PP	DarylS	21/08/14 01:33 AM
Re: Using PB projectiles designed for PP, as GC non PP	93x64mm	27/01/14 09:46 AM
Re: Using PB projectiles designed for PP, as GC non PP	eljefedouble	27/01/14 02:23 PM

Extra information

0 registered and 2 anonymous users are browsing this forum.

Moderator: DarylS

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 10295

Jump to

NitroExpress.com

Powered by UBB.threads™ 6.5.5

Home | Ezine | Forums | Links | Contact

Copyright 2003 to 2011 - all rights reserved