Home | Ezine | Forums | Links | Contact
NitroExpress.com: Double Rifle Drilling - 9.3X74R/16ga - Bernhard Merkel

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies


*** Enjoy NitroExpress.com? Participate and join in. ***

Double Rifles, Single Shots & Combinations >> Single Shots & Combination Guns

Buchsemann
.333 member


Reged: 12/12/08
Posts: 439
Loc: Wisconsin, USA
Double Rifle Drilling - 9.3X74R/16ga - Bernhard Merkel
      10/01/14 11:00 AM

Gentlemen,

Well I have finally found “the one” 9.3X74R/16ga double rifle drilling that has been on my list of desired treasures to acquire for a long time. Though this particular piece was retailed by Helmut Zehner of Frankfurt the gun was actually made by one of my favorite makers, Bernhard Merkel of Suhl as noted by his stamp "Bemesu" on the receiver and barrels. The year of manufacture is 1938. The scope is a period Hensoldt-Wetzlar Dural-Dialytan 4X with its original lens covers. I haven’t had the time, and have no idea when I will, for a proper photo shoot but hopefully these bench and den photos will suffice. What makes this DR drilling extra special, for me anyway besides being a 9.3X74R DR, is that it is a side-plate Anson & Deeley box-lock.

Here is what fellow GGCA member and NE forum contributor Kuduae had to say about the action in an earlier e-mail correspondence on the subject of this drilling:

“…this gun is neither a side-lock, nor a side-plated Blitz-/trigger plate action, but a side-plated box-lock or Anson drilling. These are quite rare, as making them is even more complicated, real expensive, than a side-lock. As you have to fit two locks on the right, one on the left of the barrel lumps, these are usually set over to the left slightly to avoid an over wide and heavy action bar. Their advantage: The action area, distance trigger to breech face, is about 1" shorter than the others, bringing the center of gravity further to the rear.”

Here too is a bit on Bernhard Merkel from Dietrich Apel’s (founder of the GGCA) “German Hunting Guns” website http://www.germanhuntingguns.com/ :

Bernhard Merkel (1874-1954) Trade Name: BEMESU - Bemesu

Bernhard Emil Merkel, a son of Friedrich Ernst Ferdinand, founded a Company at Wolfsgrube 16 (in Suhl) at an unknown date at the turn of the century. The Gun Company Bernhard Merkel is taken over by a son Fritz (1906-1976), one of the three children. All kinds of hunting and sporting guns of solid construction and execution were produced. This is also the case during the war years 1939 to 1945. It is not known whether parts for military guns were made, but this was most likely the case. The hunting guns were unsurpassed in quality and handling qualities. Bernhard was himself a hunter. The guns were marked with the B. Merkel Suhl signature. Among others Bernhard Merkel made guns for the Companies Barella, Genschow, Kettner, Kind and Mauser as well as for individual customers. To accommodate the owners and friends in these companies they also performed repairs on handguns.

By 1930 the company had approximately 12 employees. After 1945 Bernhard and his son Fritz (1906-1976) who had returned from a prison camp, worked as gunsmiths together with a stock maker for the Gun Makers’ Cooperative BüHaG into the 1970s.



























And now, off to a boar hunt!

--------------------
Happy the man, and happy he alone,
He who can call today his own:
He who, secure within, can say,
Tomorrow do thy worst, for I have lived today.

- John Dryden

Edited by CptCurl (21/04/14 09:16 PM)

Post Extras Print Post   Remind Me!     Notify Moderator


Entire topic
Subject Posted by Posted on
* Double Rifle Drilling - 9.3X74R/16ga - Bernhard Merkel Buchsemann 10/01/14 11:00 AM
. * * Re: Double Rifle Drilling - 9.3X74R/16ga - Bernhard Merkel 4seventy   10/01/14 04:54 PM
. * * Re: Double Rifle Drilling - 9.3X74R/16ga - Bernhard Merkel Waidmannsheil   10/01/14 05:42 PM
. * * Re: Double Rifle Drilling - 9.3X74R/16ga - Bernhard Merkel Sville   10/01/14 08:41 PM
. * * Re: Double Rifle Drilling - 9.3X74R/16ga - Bernhard Merkel Buchsemann   12/01/14 04:02 AM
. * * Re: Double Rifle Drilling - 9.3X74R/16ga - Bernhard Merkel 8X57   30/08/14 03:45 AM
. * * Re: Double Rifle Drilling - 9.3X74R/16ga - Bernhard Merkel mtAl   14/09/14 02:26 AM
. * * Re: Double Rifle Drilling - 9.3X74R/16ga - Bernhard Merkel heers68   14/10/14 12:46 PM
. * * Re: Double Rifle Drilling - 9.3X74R/16ga - Bernhard Merkel kcordell   20/10/14 10:56 AM

Extra information
0 registered and 81 anonymous users are browsing this forum.

Moderator:  Huvius 



Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 7840

Rate this thread

Jump to

Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved