Forums.NitroExpress.com

Home | Ezine | Forums | Links | Contact NitroExpress.com: Hammer spring guide rod

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies

*** Enjoy NitroExpress.com? Participate and join in. ***

You are not logged in. [Login]

Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Double Rifles, Single Shots & Combinations >> Building Double Rifles & Gunsmithing

Shotgunlover
.224 member

Reged: 24/08/13
Posts: 45
Loc: Greece

Re: Hammer spring guide rod
16/10/13 08:02 PM

The Silverhawk is not a trigger plate action, its springs are housed in the action body up front, it has no springs in the back pushing the hammers. The springs are fairly short and stout.

The Excelsior 88 was made by Fausti, if my memory is accurated, it should be easy to get a spring guide from them. It should be a part common to all their products using the same action. Perhaps the original spring was encased in a an external guide cylinder? That would explain why a rod seems to bend in the stock bolt post.

As for having a spring steel bent rod etc, it will cause binding on the spring and unreliable functioning.

--------------------
Shotgunlover

Post Extras

Print Post

Remind Me!

Notify Moderator

Entire topic
Subject	Posted by	Posted on
Hammer spring guide rod	Crusader68	16/10/13 06:23 AM
Re: Hammer spring guide rod	Shotgunlover	16/10/13 08:02 PM

Extra information

0 registered and 27 anonymous users are browsing this forum.

Moderator: CptCurl

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 734

Jump to

NitroExpress.com

Powered by UBB.threads™ 6.5.5

Home | Ezine | Forums | Links | Contact

Copyright 2003 to 2011 - all rights reserved