Home | Ezine | Forums | Links | Contact
NitroExpress.com: Hammer spring guide rod

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies


*** Enjoy NitroExpress.com? Participate and join in. ***
You are not logged in. [Login] Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Double Rifles, Single Shots & Combinations >> Building Double Rifles & Gunsmithing
Previous thread Previous   View all threads Index   Next thread Next   Flat Mode Flat  

Crusader68
.224 member


Reged: 25/11/11
Posts: 41
Loc: Baton Rouge, LA
Hammer spring guide rod
      16/10/13 06:23 AM

Recently I bought a sxs 12ga action to use for a double rifle build, but the action is missing a few components. There aren't any parts to be found, the shotgun is an imported trade name Italian "excelsior 88", and its not the common anson and deeley boxlock. Its what I refer to as a triggerplate action, lock parts are mounted behind the receiver and on the triggerplate. Berreta's silverhawk has a similar action, but I don't think the parts would work in this case.
I need to make a guide rod for the hammer spring, its a coil type spring, but main problem is,due to the motion of the hammer, the guide rod's hole is at an angle where it meets the stock bolt mount. So my idea was to use a spring steel(5160) to make the guide rod so that it would have the ability to flex as the hammer moves.
I just want to see if anyone has any other suggestions/tips on my problem.

--------------------
Erik S.
"... mais épargnez le visage"

Post Extras Print Post   Remind Me!     Notify Moderator


Entire topic
Subject Posted by Posted on
* Hammer spring guide rod Crusader68 16/10/13 06:23 AM
. * * Re: Hammer spring guide rod Shotgunlover   16/10/13 08:02 PM

Extra information
0 registered and 58 anonymous users are browsing this forum.

Moderator:  CptCurl 



Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 737

Rate this thread

Jump to

Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved