Forums.NitroExpress.com

Home | Ezine | Forums | Links | Contact NitroExpress.com: Siamese Mauser

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies

*** Enjoy NitroExpress.com? Participate and join in. ***

You are not logged in. [Login]

Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Shooting & Reloading - Mausers, Big Bores and others >> Mauser Discussion Forum

Oldbrit
.333 member

Reged: 04/04/10
Posts: 381
Loc: UK

Re: Siamese Mauser
03/07/13 11:45 PM

Daryl / Lancaster,

I have just deleted a posting about using a 148gr 9mm in a cut off 223 case to make a .375" bullet. I slept on it overnight and the more I thought about it the less I liked it. I did some more measurements this morning and I couldn't be sure that I hadn't got an airspace in the base of the case around the bottom of the bullet. That didn't sound like a good thing so I abandoned that idea and went back to the drawing board.

I think MkII is much closer to what you've been talking about. I cut off a 223 case just below the neck and pushed a 200 gr .30" cast bullet into it nose first. I then applied the blow torch until the lead melted. Once it had cooled I trued up the case on the case trimmer and took some measurements. The whole bullet is just over 1" long. The case still has its taper on it but as you said the base is .375" for about 3/8". For good measure I ran the whole thing as far as it would go up into a 38 Super crimp die and this reduced the first 1/4" to .360" in diameter.

What I now have is a .375" bullet with a wad cutter nose.

Edited by Oldbrit (03/07/13 11:54 PM)

Post Extras

Print Post

Remind Me!

Notify Moderator

Entire topic
Subject	Posted by	Posted on
Siamese Mauser	savage458	24/06/13 11:26 PM
Re: Siamese Mauser	Igorrock	25/06/13 12:32 AM
Re: Siamese Mauser	Oldbrit	25/06/13 02:27 AM
Re: Siamese Mauser	Igorrock	25/06/13 03:40 AM
Re: Siamese Mauser	savage458	25/06/13 05:45 AM
Re: Siamese Mauser	DarylS	25/06/13 06:21 AM
Re: Siamese Mauser	savage458	25/06/13 07:36 AM
Re: Siamese Mauser	DarylS	25/06/13 09:24 AM
Re: Siamese Mauser	savage458	25/06/13 11:36 PM
Re: Siamese Mauser	Ash	26/06/13 06:39 PM
Re: Siamese Mauser	savage458	26/06/13 09:59 PM
Re: Siamese Mauser	zimhunter	27/06/13 12:09 PM
Re: Siamese Mauser	savage458	27/06/13 10:46 PM
Re: Siamese Mauser	wjw	28/06/13 02:54 PM
Re: Siamese Mauser	savage458	28/06/13 11:43 PM
Re: Siamese Mauser	DarylS	28/06/13 11:54 PM
Re: Siamese Mauser	Grenadier	29/06/13 12:15 AM
Re: Siamese Mauser	savage458	29/06/13 02:16 AM
Re: Siamese Mauser	Grenadier	29/06/13 11:50 AM
Re: Siamese Mauser	savage458	29/06/13 12:07 PM
Re: Siamese Mauser	Grenadier	29/06/13 04:45 PM
Re: Siamese Mauser	savage458	29/06/13 11:05 PM
Re: Siamese Mauser	savage458	30/06/13 05:08 AM
Re: Siamese Mauser	Grenadier	30/06/13 05:24 AM
Re: Siamese Mauser	mehulkamdar	01/07/13 09:31 AM
Re: Siamese Mauser	DarylS	02/07/13 12:52 AM
Re: Siamese Mauser	Oldbrit	02/07/13 03:25 AM
Re: Siamese Mauser	lancaster	02/07/13 04:20 AM
Re: Siamese Mauser	Oldbrit	02/07/13 06:20 AM
Re: Siamese Mauser	DarylS	02/07/13 08:20 AM
Re: Siamese Mauser	Oldbrit	02/07/13 10:41 PM
Re: Siamese Mauser	DarylS	03/07/13 12:30 AM
Re: Siamese Mauser	Oldbrit	03/07/13 11:45 PM
Re: Siamese Mauser	DarylS	29/06/13 03:23 PM
Re: Siamese Mauser	DarylS	25/06/13 12:14 AM
Re: Siamese Mauser	savage458	25/06/13 03:50 AM

Extra information

0 registered and 214 anonymous users are browsing this forum.

Moderator: NitroX

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 20222

Jump to

NitroExpress.com

Powered by UBB.threads™ 6.5.5

Home | Ezine | Forums | Links | Contact

Copyright 2003 to 2011 - all rights reserved