Home | Ezine | Forums | Links | Contact
NitroExpress.com: The 600 Overkill....

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies


*** Enjoy NitroExpress.com? Participate and join in. ***

Shooting & Reloading - Mausers, Big Bores and others >> Big Bore Rifles

Ripp
.577 member


Reged: 19/02/07
Posts: 16072
Loc: Montana, USA
The 600 Overkill....
      28/01/12 10:14 PM

The 600 Overkill was designed by scientist Robert Garnick of Las Vegas, Nevada. It was intended to take full advantage of the dimensions of the CZ550 action in order to fit into that action the largest cartridge that could be accommodated. With moderate alterations, a CZ550 can be made to accommodate 2 cartridges of 600 Overkill in the magazine plus one in the chamber. Using brass solids bullets, the 600 Overkill will penetrate 6 feet into an oak log. Even elephant skulls are not as dense as oak, assuring that the 600 Overkill pushing 900 grain solid bullets at 2400 f.p.s. will offer excellent penetration on any game.

The 600 Overkill case originated from the 600 Nitro Express. The rim was removed from the 600 Nitro Express and a belt was added for headspacing purposes. A 0.640" rebated rim was cut on the case - the same size used by the .505 Gibbs. The case walls were left straight for a 3.0 inch case and a 3.75 inch cartridge overall length. Custom 3 groove barrels with 1:16 twist are made by Pac-Nor Barrels of Brookings, Oregon. A 3 groove barrel with a 1:16" twist was chosen to keep pressures low and permit the cartridge to achieve higher velocities than would be otherwise possible. This scheme seems to have worked because with the same powder charge and bullet, the 600 Overkill achieves about 75 f.p.s. more velocity than the 600 Nitro Express.


The 600 Overkill has the ability to push a 900 grain bullet at more than 2400 f.p.s. if the shooter can withstand the recoil and maintain his grip on the gun. At that level of power, as the bullet spins down the barrel, the rifle is torqued in the opposite direction, tending to twist the forearm of the rifle out of the shooter's hand. Brass for the 600 Overkill is available on a special order basis from Dieter Horneber (www.huelsen-horneber.com) of Germany. Rifles may be ordered from American Hunting Rifles for not much more than US$3000. For the big bore fan who needs the biggest affordable big bore, the 600 Overkill based on a CZ550 action is for him.


Example of 600 Overkill loads
900 grain Woodleigh FMJ 2150 f.p.s. Controllable recoil when fired in a 14 pound rifle with 3 mercury recoil reducers and a muzzle brake.


2400 f.p.s. The forearm is difficult to hold onto at this velocity due to torque created by the bullet spinning down the bore.

--------------------
ALL MEN DIE, BUT FEW MEN TRULY LIVE..

Post Extras Print Post   Remind Me!     Notify Moderator


Entire topic
Subject Posted by Posted on
* The 600 Overkill.... Ripp 28/01/12 10:14 PM
. * * Re: The 600 Overkill.... Ben   28/01/12 10:19 PM
. * * Re: The 600 Overkill.... Ripp   28/01/12 10:51 PM
. * * Re: The 600 Overkill.... Mike_Bailey   28/01/12 11:23 PM
. * * Re: The 600 Overkill.... 458Win   29/01/12 06:30 AM
. * * Re: The 600 Overkill.... NitroXAdministrator   28/05/14 12:16 AM
. * * Re: The 600 Overkill.... DarylS   28/05/14 01:41 AM
. * * Re: The 600 Overkill.... Ahmed577   28/05/14 02:19 AM
. * * Re: The 600 Overkill.... Ripp   28/05/14 05:14 AM
. * * Re: The 600 Overkill.... Mike_Bailey   29/01/12 06:49 AM
. * * Re: The 600 Overkill.... 458Win   29/01/12 07:35 AM
. * * Re: The 600 Overkill.... DarylS   29/01/12 08:14 AM
. * * Re: The 600 Overkill.... 458Win   30/01/12 05:08 AM
. * * Re: The 600 Overkill.... Omnivorous_Bob   24/02/13 09:57 AM
. * * Re: The 600 Overkill.... Ripp   21/05/14 06:35 AM
. * * Re: The 600 Overkill.... bigdog   21/05/14 09:13 AM
. * * Re: The 600 Overkill.... Ripp   21/05/14 10:52 PM
. * * Re: The 600 Overkill.... tinker   21/05/14 09:23 AM
. * * Re: The 600 Overkill.... mauserand9mm   21/05/14 10:07 AM
. * * Re: The 600 Overkill.... tinker   21/05/14 10:59 AM
. * * Re: The 600 Overkill.... gryphon   30/01/12 09:28 PM
. * * Re: The 600 Overkill.... Ripp   31/01/12 03:46 AM
. * * Re: The 600 Overkill.... fourbore   31/01/12 08:29 AM
. * * Re: The 600 Overkill.... gryphon   31/01/12 09:28 AM
. * * Re: The 600 Overkill.... tinker   31/01/12 01:34 PM
. * * Re: The 600 Overkill.... Mike_Bailey   31/01/12 11:16 PM
. * * Re: The 600 Overkill.... Ash   01/02/12 08:00 AM
. * * Re: The 600 Overkill.... fourbore   01/02/12 10:33 AM
. * * Re: The 600 Overkill.... tinker   01/02/12 03:42 PM
. * * Re: The 600 Overkill.... kamilaroi   01/02/12 07:49 PM
. * * Re: The 600 Overkill.... 500Boswell   28/05/14 03:18 PM
. * * Re: The 600 Overkill.... chuck375   29/05/14 06:50 AM
. * * Re: The 600 Overkill.... tinker   29/05/14 09:13 AM
. * * Re: The 600 Overkill.... chuck375   03/06/14 01:02 PM
. * * Re: The 600 Overkill.... bigdog   10/06/14 08:39 AM
. * * Re: The 600 Overkill.... Ripp   28/05/14 03:59 PM
. * * Re: The 600 Overkill.... NitroXAdministrator   28/05/14 12:14 AM
. * * Re: The 600 Overkill.... sbs470   01/02/12 10:24 PM
. * * Re: The 600 Overkill.... bigdog   15/12/12 11:18 AM
. * * Re: The 600 Overkill.... bobrhess   10/05/13 06:16 AM
. * * Re: The 600 Overkill.... Ben   10/05/13 06:40 AM
. * * Re: The 600 Overkill.... hubel458   11/05/13 08:51 AM
. * * Re: The 600 Overkill.... bigdog   20/05/14 09:41 AM
. * * Re: The 600 Overkill.... FrankMartinez   30/12/12 05:26 PM
. * * Re: The 600 Overkill.... Dresden   19/02/13 01:23 AM
. * * Re: The 600 Overkill.... NitroXAdministrator   28/05/14 12:07 AM
. * * Re: The 600 Overkill.... DarylS   19/02/13 03:09 AM
. * * Re: The 600 Overkill.... tinker   19/02/13 09:44 AM
. * * Re: The 600 Overkill.... andrevannibos   31/01/12 01:27 AM
. * * Re: The 600 Overkill.... gryphon   29/01/12 08:31 AM
. * * Re: The 600 Overkill.... paradox_   20/05/14 01:36 PM
. * * Re: The 600 Overkill.... Ben   29/01/12 09:34 AM
. * * Re: The 600 Overkill.... tinker   29/01/12 10:59 AM
. * * Re: The 600 Overkill.... Ash   29/01/12 11:12 PM
. * * Re: The 600 Overkill.... Con   30/01/12 08:22 PM

Extra information
0 registered and 43 anonymous users are browsing this forum.

Moderator:   



Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 39050

Rate this thread

Jump to

Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved