Home | Ezine | Forums | Links | Contact
NitroExpress.com: saeco 740 mould for 450/400NE in Ruger #1

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies


*** Enjoy NitroExpress.com? Participate and join in. ***
You are not logged in. [Login] Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Shooting & Reloading - Mausers, Big Bores and others >> Cast Bullets
Previous thread Previous   View all threads Index   Next thread Next   Flat Mode Flat  

209jones
.224 member


Reged: 29/05/11
Posts: 13
Loc: Calgary AB
Re: saeco 740 mould for 450/400NE in Ruger #1
      28/10/11 01:41 PM

Got out today, kinda cool (35-40degF) and wind was gusting to 40Km or so. Used 48gr AA5744 with the 320gr and 42-46gr with the 400gr. Used F215 in all of them. Both bullets were sixed 412 on the bands and 410 on the nose down to the crimp ring.
Didn't have any semi breechseaters in this bunch, no duds either.
48gr AA5744 with the 320gr LBT WFN load ran 2041 avg, 15fps SD.
42-46gr AA5744 with the 400gr LBT LFN ran 1711 to 1885 fps, came out slower than what I was hoping to see. Noticed the difference in recoil though.
So I've settled on the 320gr for the hunting load for this time period. It shoots good enough to kill sumthin.

Post Extras Print Post   Remind Me!     Notify Moderator


Entire topic
Subject Posted by Posted on
* saeco 740 mould for 450/400NE in Ruger #1 209jones 17/07/11 05:49 PM
. * * Re: saeco 740 mould for 450/400NE in Ruger #1 209jones   25/08/11 07:22 PM
. * * Re: saeco 740 mould for 450/400NE in Ruger #1 DarylSModerator   26/08/11 01:47 AM
. * * Re: saeco 740 mould for 450/400NE in Ruger #1 209jones   17/09/11 04:23 AM
. * * Re: saeco 740 mould for 450/400NE in Ruger #1 209jones   26/09/11 12:47 PM
. * * Re: saeco 740 mould for 450/400NE in Ruger #1 209jones   23/10/11 03:06 AM
. * * Re: saeco 740 mould for 450/400NE in Ruger #1 DarylSModerator   23/10/11 03:48 AM
. * * Re: saeco 740 mould for 450/400NE in Ruger #1 209jones   27/10/11 01:15 AM
. * * Re: saeco 740 mould for 450/400NE in Ruger #1 209jones   28/10/11 01:41 PM

Extra information
0 registered and 87 anonymous users are browsing this forum.

Moderator:  DarylS 



Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 5795

Rate this thread

Jump to

Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved