Forums.NitroExpress.com

Home | Ezine | Forums | Links | Contact NitroExpress.com: Brno ZKK 600 9,3x62mm Project

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies

*** Enjoy NitroExpress.com? Participate and join in. ***

You are not logged in. [Login]

Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Shooting & Reloading - Mausers, Big Bores and others >> Mauser Discussion Forum

TilleyMan
.333 member

Reged: 23/08/05
Posts: 272
Loc: Melbourne, Australia

Brno ZKK 600 9,3x62mm Project
20/10/11 12:13 AM

At last a chance to post some photos of a recent pickup... a 1972 Brno ZKK600 (rare early pop-up peep with twin assist springs and lock screw!) fitted with the standard trigger.

It had been converted by a reasonable gunsmith from 7x57mm to 9.3x62mm utilising the existing front banded swivel and foresight ramp... which means a nice trim and lightweight rifle, a 24" barrel should get the most from the cartridge.

The checkering was quite carefully recut, but the original front barrel bedding tension screw was deleted and the hole rather crudely filled in with bedding compound.

Seen a lot of carrying but not much use... fairly standard for a Sambar rifle.
The bore was mirror bright when I finally got all the powder fouling and copper out

Unfortunately at some stage the rifle passed onto someone who really didn't care for it... very poorly fitted recoil pad, two 5/8" holes drilled into the butt to lighten it has upset the balance and shifted it too far forward, various screw heads butchered etc.

Since I got it at a very good price, I thouight i would have fun restoring it and sharing the process with forum members who appreciate the ZKK!

Will provide updates as I go... but as a start here's the 'before' shots

Note gap between end of extractor to receiver... the ZKK extractor has been replaced by the slightly shorter M98 extractor

Luckily a CZ550 extractor is the same as a ZKK!

Someone has done a poor bedding job, which has meant the stock has cracked around the recoil reinforcement and rear tang.
I intend to try and fix the stock, but if too far gone will replace it.

Note 'mousetrap' coiled trigger assist spring to replace the original flat one

Update... metalwork is now well into the white, should clean up nicely... more shots to follow soon!
I'm being careful to retain or restore crisp edges, peening galled screw heads back in place... enjoyable when you can take the time to get it right

Edited by CptCurl (28/11/11 01:08 AM)

Post Extras

Print Post

Remind Me!

Notify Moderator

Entire topic
Subject	Posted by	Posted on
Brno ZKK 600 9,3x62mm Project	TilleyMan	20/10/11 12:13 AM
Re: Brno ZKK 600 9,3x62mm Project	Sville	20/10/11 02:13 AM
Re: Brno ZKK 600 9,3x62mm Project	DarylS	20/10/11 02:52 AM
Re: Brno ZKK 600 9,3x62mm Project	FATBOY404	20/10/11 07:58 AM
Re: Brno ZKK 600 9,3x62mm Project	9.3x57	20/10/11 01:04 PM
Re: Brno ZKK 600 9,3x62mm Project	kamilaroi	20/10/11 03:04 PM
Re: Brno ZKK 600 9,3x62mm Project	JDL	22/10/11 11:16 AM
Re: Brno ZKK 600 9,3x62mm Project	GK	22/10/11 06:42 PM
Re: Brno ZKK 600 9,3x62mm Project	TilleyMan	22/10/11 07:40 PM
Re: Brno ZKK 600 9,3x62mm Project	GK	22/10/11 09:38 PM
Re: Brno ZKK 600 9,3x62mm Project	AdamTayler	24/11/11 01:51 PM
Re: Brno ZKK 600 9,3x62mm Project	Igorrock	12/01/12 05:34 AM
Re: Brno ZKK 600 9,3x62mm Project	FATBOY404	12/01/12 06:37 AM
Re: Brno ZKK 600 9,3x62mm Project	tophet1	12/01/12 07:34 AM
Re: Brno ZKK 600 9,3x62mm Project	TilleyMan	12/01/12 07:04 PM
Re: Brno ZKK 600 9,3x62mm Project	Rule303	12/01/12 10:01 PM
Re: Brno ZKK 600 9,3x62mm Project	TilleyMan	14/01/12 03:38 PM
Re: Brno ZKK 600 9,3x62mm Project	CHAPUISARMES	14/01/12 04:12 PM
Re: Brno ZKK 600 9,3x62mm Project	TilleyMan	15/07/12 08:09 PM
Re: Brno ZKK 600 9,3x62mm Project	AFRO408	15/07/12 08:49 PM
Re: Brno ZKK 600 9,3x62mm Project	Ben	15/07/12 09:25 PM
Re: Brno ZKK 600 9,3x62mm Project	Rule303	15/07/12 11:51 PM
Re: Brno ZKK 600 9,3x62mm Project	DarylS	16/07/12 02:23 AM
Re: Brno ZKK 600 9,3x62mm Project	TilleyMan	16/07/12 06:36 AM
Re: Brno ZKK 600 9,3x62mm Project	DarylS	17/07/12 01:26 AM
Re: Brno ZKK 600 9,3x62mm Project	TilleyMan	17/07/12 12:04 PM
Re: Brno ZKK 600 9,3x62mm Project	DarylS	18/07/12 01:42 AM
Re: Brno ZKK 600 9,3x62mm Project	CHAPUISARMES	12/01/12 07:25 PM
Re: Brno ZKK 600 9,3x62mm Project	tophet1	12/01/12 08:53 PM
Re: Brno ZKK 600 9,3x62mm Project	CHAPUISARMES	22/10/11 07:39 PM
Re: Brno ZKK 600 9,3x62mm Project	Poss	22/10/11 07:26 PM

Extra information

2 registered and 175 anonymous users are browsing this forum.

Moderator: NitroX

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 55895

Jump to

NitroExpress.com

Powered by UBB.threads™ 6.5.5

Home | Ezine | Forums | Links | Contact

Copyright 2003 to 2011 - all rights reserved