Forums.NitroExpress.com

Home | Ezine | Forums | Links | Contact NitroExpress.com: Saturday's casting session

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies

*** Enjoy NitroExpress.com? Participate and join in. ***

You are not logged in. [Login]

Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Shooting & Reloading - Mausers, Big Bores and others >> Cast Bullets

450_Ackley
.375 member

Reged: 06/02/03
Posts: 583
Loc: Darling Downs, Qld Australia

Saturday's casting session
24/04/11 09:29 AM

Found some time yesterday to cast a few bullets, I usually run 2-3 moulds at one time, rotating around each mould, allowing time to cool between casts. Once I get a rhythm going, it's not hard to end up with a good pile of bullets after a few hours.
The moulds I used yesterday are a CBE 258-80-SP, an 80 grain pointed bullet for my wifes 257 Roberts, I load it with 12 grains of TrailBoss for 1773 fps.
This is a pic of some of the bullets from the mould.

The next one I cast was a mould I've just aquired, it has taken me about 5 years of searching to get this mould, I bought it as a secondhand mould, it arrived brand new, it had never cast a bullet... until yesterday.
It is an old discontinued Lyman bullet 3589, or 358009, and was touted as being THE bullet for the 35 Whelen, we'll see soon enough. Straight from the mould it weighs 282 grains, which is what Lyman listed it as. I can't wait to get some of them loaded up and head to the range.

The last one I cast is a CBE mould for FATBOY404, it will be for his 404 Jeffery, as soon as I make a new lube sizer die at 0.424" and a neck expander die to suit. This is a borrowed mould from a friend, who uses it in his 404. This one weighs in at 427 grains from the mould, 44 cal gas-checks will slip on nicely. Should work very well I'm hoping.

Edited by CptCurl (09/05/11 08:38 PM)

Post Extras

Print Post

Remind Me!

Notify Moderator

Entire topic
Subject	Posted by	Posted on
Saturday's casting session	450_Ackley	24/04/11 09:29 AM
Re: Saturday's casting session	FATBOY404	24/04/11 12:03 PM
Re: Saturday's casting session	450_Ackley	24/04/11 05:50 PM
Re: Saturday's casting session	Perry	25/04/11 11:24 PM
Re: Saturday's casting session	DarylS	26/04/11 02:55 AM
Re: Saturday's casting session	FATBOY404	26/04/11 06:59 AM
Re: Saturday's casting session	450_Ackley	26/04/11 07:36 AM
Re: Saturday's casting session	FATBOY404	26/04/11 07:15 PM
Re: Saturday's casting session	Sarg	26/04/11 07:37 PM
Re: Saturday's casting session	DarylS	27/04/11 02:07 AM
Re: Saturday's casting session	eagle27	27/04/11 05:03 PM
Re: Saturday's casting session	450_Ackley	27/04/11 07:57 PM
Re: Saturday's casting session	FATBOY404	27/04/11 08:10 PM
Re: Saturday's casting session	450_Ackley	27/04/11 08:42 PM
Re: Saturday's casting session	450_Ackley	26/04/11 06:56 AM

Extra information

0 registered and 0 anonymous users are browsing this forum.

Moderator: DarylS

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 6417

Jump to

NitroExpress.com

Powered by UBB.threads™ 6.5.5

Home | Ezine | Forums | Links | Contact

Copyright 2003 to 2011 - all rights reserved