Forums.NitroExpress.com

Home | Ezine | Forums | Links | Contact NitroExpress.com: Ruger No.1 from .458 Lott to 450NE 3 1/4

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies

*** Enjoy NitroExpress.com? Participate and join in. ***

You are not logged in. [Login]

Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Double Rifles, Single Shots & Combinations >> Single Shots & Combination Guns

radin
.275 member

Reged: 04/08/10
Posts: 93
Loc: Pennsylvania

Re: Ruger No.1 from .458 Lott to 450NE 3 1/4
23/11/10 01:46 PM

Tongo ,

I know this reply is a bit late for your thread . I took a Ruger #1 in 458 Lott and did exactly what you wanted . The cost was that of the chamber reamer in 450 3 1/2 express . The belt on the 458 Lott is smaller in diameter than the base of the 450NE . The Ruger extractor is spring loaded from the side so it does adjust to the different rim diameters including that of the 450 . The only other slight modifications were to remove a small amount of metal from the top of the breech block slightly to clear the rim for extraction and to remove the breech end of the sliding safety to also clear the rim during extraction . I did the conversion with the stainless steel tropical and had to polish the chamber but I would venture the regular steel would cut easier with the reamer . It shoots very well and functions flawlessly , and is the type of project you could do at home with simple tools if you were inclined . It took about 3 hours to dismount the barrel , cut and polish the chamber , breech block , and safety slide and reassemble . Recoil is very tolerable . Jim

Post Extras

Print Post

Remind Me!

Notify Moderator

Entire topic
Subject	Posted by	Posted on
Ruger No.1 from .458 Lott to 450NE 3 1/4	Tongo	07/03/09 02:11 AM
Re: Ruger No.1 from .458 Lott to 450NE 3 1/4	SharpsNitro	07/03/09 05:21 PM
Re: Ruger No.1 from .458 Lott to 450NE 3 1/4	bonanza	08/03/09 12:19 AM
Re: Ruger No.1 from .458 Lott to 450NE 3 1/4	bouldersmith	08/03/09 12:54 AM
Re: Ruger No.1 from .458 Lott to 450NE 3 1/4	DarylS	08/03/09 02:27 AM
Re: Ruger No.1 from .458 Lott to 450NE 3 1/4	SharpsNitro	08/03/09 04:09 AM
Re: Ruger No.1 from .458 Lott to 450NE 3 1/4	DarylS	08/03/09 08:06 AM
Re: Ruger No.1 from .458 Lott to 450NE 3 1/4	SharpsNitro	08/03/09 04:16 PM
Re: Ruger No.1 from .458 Lott to 450NE 3 1/4	radin	23/11/10 01:46 PM
Re: Ruger No.1 from .458 Lott to 450NE 3 1/4	bouldersmith	08/03/09 12:18 AM
Re: Ruger No.1 from .458 Lott to 450NE 3 1/4	bonanza	07/03/09 02:35 AM
Re: Ruger No.1 from .458 Lott to 450NE 3 1/4	DarylS	07/03/09 03:31 AM
Re: Ruger No.1 from .458 Lott to 450NE 3 1/4	Marrakai	07/03/09 10:19 AM
Re: Ruger No.1 from .458 Lott to 450NE 3 1/4	DarylS	07/03/09 11:06 AM

Extra information

1 registered and 183 anonymous users are browsing this forum.

Moderator: Huvius

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 6797

Jump to

NitroExpress.com

Powered by UBB.threads™ 6.5.5

Home | Ezine | Forums | Links | Contact

Copyright 2003 to 2011 - all rights reserved