Forums.NitroExpress.com

Home | Ezine | Forums | Links | Contact NitroExpress.com: Is 1 1/4" moa accuracy good enough?

*** Enjoy NitroExpress.com? Participate and join in. ***

You are not logged in. [Login]

Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Shooting & Reloading - Mausers, Big Bores and others >> Big Bore Rifles

Eric
.224 member

Reged: 28/06/04
Posts: 45
Loc: Wisconsin, USA

Re: Is 1 1/4" moa accuracy good enough?
15/07/04 05:20 AM

mikeh416Rigby; I agree with the rest of the replys. One and a quarter inch groups are good enough. Some people measure group by using center to center of the bullet holes, this is the accepted method in competition shooting. I measure my hunting rifle loads by just laying a circle template over the group and with 4 or 5 shot groups,just call as it fits. With a good shooting rifle and good ammuntions, just think about a 4x or 6x scope and a four inch black square target at 100 yards. Is every shot exactly centered when you break the trigger? If it's not, there is sighting error in you group results. The point is, if every shot you fire lands within three quarter of an inch when you broke the trigger, I think it's good enough. Load up a bunch of cartridges, shoot the hell out of your rifle, and take a really good buffalo with it. ERIC

Post Extras

Entire topic
Subject	Posted by	Posted on
Is 1 1/4" moa accuracy good enough?	mikeh416Rigby	07/05/04 06:57 PM
Re: Is 1 1/4" moa accuracy good enough?	shrike	18/07/04 09:34 AM
Re: Is 1 1/4" moa accuracy good enough?	mikeh416Rigby	18/07/04 12:54 PM
Re: Is 1 1/4" moa accuracy good enough?	atkinson6	22/07/04 08:05 AM
Re: Is 1 1/4" moa accuracy good enough?	Eric	15/07/04 05:20 AM
Re: Is 1 1/4" moa accuracy good enough?	475Guy	08/05/04 01:50 PM
Re: Is 1 1/4" moa accuracy good enough?	mikeh416Rigby	08/05/04 11:45 PM
Re: Is 1 1/4" moa accuracy good enough?	chrispie	08/05/04 01:34 PM
Re: Is 1 1/4" moa accuracy good enough?	mikeh416Rigby	08/05/04 11:42 PM
Re: Is 1 1/4" moa accuracy good enough?	450Dakota	10/05/04 02:10 AM
Re: Is 1 1/4" moa accuracy good enough?	NitroX	08/05/04 01:37 AM
Re: Is 1 1/4" moa accuracy good enough?	450Dakota	08/05/04 01:32 AM
Re: Is 1 1/4" moa accuracy good enough?	allenday	07/05/04 11:11 PM
Re: Is 1 1/4" moa accuracy good enough?	safari_hunter	07/05/04 07:38 PM

Extra information

0 registered and 29 anonymous users are browsing this forum.

Moderator:

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 3173

Jump to

NitroExpress.com

Home | Ezine | Forums | Links | Contact