Home | Ezine | Forums | Links | Contact
NitroExpress.com: Initial barrel convergence setup

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies


*** Enjoy NitroExpress.com? Participate and join in. ***

Double Rifles, Single Shots & Combinations >> Building Double Rifles & Gunsmithing

450_366
.400 member


Reged: 17/01/07
Posts: 1068
Loc: Sweden, west-coast.
Re: Initial barrel convergence setup
      02/04/10 07:26 AM

Quote:

Maybe this has nothing whatsoever to do with the question but I wonder if the upward pressure on some forend tips in some light barelled bolt actions would not have an effect on the tip of a barrel similar to setting the double barrels parralell and bringing the muzzles together for convergance. That is, it has no discernable ill effect for hunting situations and neither would the slight pinching of the doubles barells.

Von Gruff.




Are you saying what i think or are im misunderstanding it completely. I make sure none of my bolts forends are even touching the barrel to get decent accuracy, mostly due to humidity but also if shooting series. My worst case did spread the bullets some 35cm at 100m from shot one to shot four.


But you are right in a hunting situation it wont mather, usually there are only one or two shots fired, but its good to know it will hold the groups if more round were needed.

--------------------
Andreas

"Yeas it kicks like a mule he said, but always remember that its much worse standing on the other end"

Post Extras Print Post   Remind Me!     Notify Moderator


Entire topic
Subject Posted by Posted on
* Initial barrel convergence setup sullyva 09/02/10 11:13 AM
. * * Re: Initial barrel convergence setup akjeff   09/02/10 01:01 PM
. * * Re: Initial barrel convergence setup baileybradshaw   09/02/10 02:30 PM
. * * Re: Initial barrel convergence setup CHAPUISARMES   10/02/10 11:24 AM
. * * Re: Initial barrel convergence setup Ron_Vella   01/04/10 12:11 PM
. * * Re: Initial barrel convergence setup 450_366   01/04/10 04:51 PM
. * * Re: Initial barrel convergence setup Paul   01/04/10 11:38 PM
. * * Re: Initial barrel convergence setup VonGruff   02/04/10 06:43 AM
. * * Re: Initial barrel convergence setup 450_366   02/04/10 07:26 AM

Extra information
0 registered and 26 anonymous users are browsing this forum.

Moderator:  CptCurl 



Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 1259

Rate this thread

Jump to

Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved