Forums.NitroExpress.com

Home | Ezine | Forums | Links | Contact NitroExpress.com: Hydrostatically Stabilised solids from Woodleigh

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies

*** Enjoy NitroExpress.com? Participate and join in. ***

You are not logged in. [Login]

Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Double Rifles, Single Shots & Combinations >> Double Rifles

wombat
.300 member

Reged: 06/03/04
Posts: 163
Loc: Australia

Hydrostatically Stabilised solids from Woodleigh
27/12/09 05:43 PM

570 gn Solid for 500 Nitro

The new solids from Woodleigh have just arrived.Phone conversation with Woodleigh suggested loads suitable to same weight softs of traditional construction could be used.
These are very long projecties.They weigh 570gn,same as the old solids and the body runs less than bore diameter.Only with significant load compression could I produce a loaded round using my usual load of 94gn R15 that would provide about 2mm clearance to the engagement of the rifling.I used a small 6mm slice of foam wad over the load to try and prevent powder grains blistering the walls of the case.
I pulled a load apart and found these compress to next to nothing.The rounds did chamber effortlessly in my 500 double when finished.OAL at 88mm.
Have yet to fire any.
Any advice from those who have used them?

Edited by wombat (27/12/09 05:52 PM)

Post Extras

Print Post

Remind Me!

Notify Moderator

Entire topic
Subject	Posted by	Posted on
Hydrostatically Stabilised solids from Woodleigh	wombat	27/12/09 05:43 PM

Extra information

1 registered and 714 anonymous users are browsing this forum.

Moderator: CptCurl

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 2246

Jump to

NitroExpress.com

Powered by UBB.threads™ 6.5.5

Home | Ezine | Forums | Links | Contact

Copyright 2003 to 2011 - all rights reserved