Home | Ezine | Forums | Links | Contact
NitroExpress.com: Rodda 404

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies


*** Enjoy NitroExpress.com? Participate and join in. ***

Shooting & Reloading - Mausers, Big Bores and others >> Big Bore Rifles

Shikari
.224 member


Reged: 25/08/09
Posts: 38
Loc: India
Re: Rodda 404
      16/12/09 07:16 AM

The Rodda I examined shows interesting markings
Proofed for cordite 60- 400 max
Caliber 404 ex
Underside of the barrel stamped 10.3mm and 74
Barrel stamped KRUPP STAHL
The markings have left me confused, the metric equivalent of the 404 NE would be 10.75 x 73. On another thread about Dons 404 mauser i also saw 10.3mm stamped, i guess this is the diameter across the lands but then how can this correspond to a groove diameter of 10.75 mm(.423 inches). Using modern .423 inch bullets on an undersize bore could be dangerous but Dons says that his mauser takes modern 404 ammo. So does this mean that a german stamp of 10.3 means a groove diameter of .423 inches??
Incidentally the German 10.75 x 68 mauser has a groove diameter of .423 inches but then the barrels are usually stamped 10.5 mm not 10.3mm
Also what does 74 instead of 73 imply??

Post Extras Print Post   Remind Me!     Notify Moderator


Entire topic
Subject Posted by Posted on
* Rodda 404 Shikari 06/12/09 01:39 AM
. * * Re: Rodda 404 Huvius   06/12/09 03:45 AM
. * * Re: Rodda 404 Shikari   06/12/09 07:02 AM
. * * Re: Rodda 404 eagle27   06/12/09 09:29 AM
. * * Re: Rodda 404 Shikari   10/12/09 07:12 AM
. * * Re: Rodda 404 xausa   10/12/09 07:39 AM
. * * Re: Rodda 404 Shikari   13/12/09 10:23 PM
. * * Re: Rodda 404 Shikari   16/12/09 07:16 AM

Extra information
0 registered and 76 anonymous users are browsing this forum.

Moderator:   



Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 5188

Rate this thread

Jump to

Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved