Home | Ezine | Forums | Links | Contact
NitroExpress.com: .577 2-3/4" barrel shank diameter

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies


*** Enjoy NitroExpress.com? Participate and join in. ***
You are not logged in. [Login] Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Double Rifles, Single Shots & Combinations >> Single Shots & Combination Guns
Previous thread Previous   View all threads Index   Next thread Next   Flat Mode Flat  

Bramble
.375 member


Reged: 29/07/06
Posts: 950
Loc: England
Re: .577 2-3/4" barrel shank diameter
      18/01/09 11:23 AM

1" major 14 Tpi and I would imagine that it is a 55degree thread.

Check the thread pattern on the Gibbs, I would also expect it to be 55 degrees, NOT the US and European 60degrees.
To give you the safest rebarrel on this old action check this and cut the thread tight, then lap the threads in ( 320 -400 paste tighten-undo, tighten-undo and repeat until the barrel seats). It will only take 10-15 mins, but it does ensure that the pressure is evenly spread all around the breach on fireing.

Regards

Post Extras Print Post   Remind Me!     Notify Moderator


Entire topic
Subject Posted by Posted on
* .577 2-3/4" barrel shank diameter Glenn_Fewless 18/01/09 04:44 AM
. * * Re: .577 2-3/4" barrel shank diameter peter   18/01/09 06:04 AM
. * * Re: .577 2-3/4" barrel shank diameter Bramble   18/01/09 06:18 AM
. * * Re: .577 2-3/4" barrel shank diameter Glenn_Fewless   18/01/09 09:38 AM
. * * Re: .577 2-3/4" barrel shank diameter Bramble   18/01/09 11:23 AM
. * * Re: .577 2-3/4" barrel shank diameter Glenn_Fewless   18/01/09 12:46 PM
. * * Re: .577 2-3/4" barrel shank diameter belgmart   19/01/09 01:14 AM
. * * Re: .577 2-3/4" barrel shank diameter Bramble   19/01/09 05:13 AM
. * * Re: .577 2-3/4" barrel shank diameter Glenn_Fewless   19/01/09 05:44 AM
. * * Re: .577 2-3/4" barrel shank diameter belgmart   20/01/09 05:19 AM
. * * Re: .577 2-3/4" barrel shank diameter Glenn_Fewless   20/01/09 08:46 AM
. * * Re: .577 2-3/4" barrel shank diameter belgmart   21/01/09 05:22 AM
. * * Re: .577 2-3/4" barrel shank diameter Glenn_Fewless   21/01/09 07:52 AM
. * * Re: .577 2-3/4" barrel shank diameter belgmart   22/01/09 04:56 AM

Extra information
0 registered and 22 anonymous users are browsing this forum.

Moderator:  Huvius 



Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 5352

Rate this thread

Jump to

Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved