Forums.NitroExpress.com

Home | Ezine | Forums | Links | Contact NitroExpress.com: Sauer + Miller & Val Greiss drillings

*** Enjoy NitroExpress.com? Participate and join in. ***

You are not logged in. [Login]

Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Double Rifles, Single Shots & Combinations >> Single Shots & Combination Guns

SteveG
.224 member

Reged: 18/11/08
Posts: 6
Loc: Washington, USA

Re: Sauer + Miller & Val Greiss drillings
17/01/09 06:50 AM

I wouldn't say it is an elongated version of the 43 mauser as it is a straight wall case. Hence using 400 nitro express brass.

Unfortunately, load development for it came to a screeching halt as I determined it was off the face. So until I spend a chunk of money to fix, it's on the back burner for now.

All put together it felt tight, but upon firing it showed the primers had backed out of the case head (As in excessive headspace, not high pressure) and when I pulled the forearm, held the gun upside down and shook it side to side it was then obvious.

So, in the mean time until I get it fixed, I'm learning to cast bullets and working on other black powder cartridge arms so when I get back to working on it, I'll be at the top of my game for dealing with odd black powder cartridges.

Post Extras

Entire topic
Subject	Posted by	Posted on
Sauer + Miller & Val Greiss drillings	kcordell	18/04/08 01:08 PM
Re: Sauer + Miller & Val Greiss drillings	SteveG	20/11/08 04:50 AM
Re: Sauer + Miller & Val Greiss drillings	kcordell	27/12/08 04:17 PM
Re: Sauer + Miller & Val Greiss drillings	SteveG	17/01/09 06:50 AM
Re: Sauer + Miller & Val Greiss drillings DELETED	luv2safari	18/04/08 03:55 PM
Re:Sauer + Miller & Val Greiss drillings	88MauSporter	18/04/08 11:05 PM
Re: Sauer + Miller & Val Greiss drillings	kcordell	18/04/08 11:20 PM
Sauer + Miller & Greis drillings	NitroX	19/04/08 02:31 AM
Re: Sauer + Miller & Greiss drillings	kcordell	19/04/08 02:34 AM
Re: Sauer + Miller & Greiss drillings	kcordell	19/04/08 05:08 AM
Re: Sauer + Miller & Greiss drillings	Nakihunter	19/04/08 12:34 PM
Re: Sauer + Miller & Greiss drillings	kcordell	19/04/08 10:17 PM
Re: Sauer + Miller & Greiss drillings	mehulkamdar	20/04/08 12:25 AM
Re: Sauer + Miller & Greiss drillings	kcordell	21/04/08 01:55 PM
Re: Sauer + Miller & Greiss drillings	dale	24/04/08 06:38 PM
Re: Sauer + Miller & Greiss drillings	heers68	19/04/08 10:47 PM

Extra information

0 registered and 90 anonymous users are browsing this forum.

Moderator: Huvius

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 14526

Jump to

NitroExpress.com

Home | Ezine | Forums | Links | Contact