Home | Ezine | Forums | Links | Contact
NitroExpress.com: hammer shotgun conversion

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies


*** Enjoy NitroExpress.com? Participate and join in. ***

Double Rifles, Single Shots & Combinations >> Building Double Rifles & Gunsmithing

Birdhunter50
.375 member


Reged: 03/06/07
Posts: 815
Loc: Iowa,U.S.A.
Re: hammer shotgun conversion
      09/09/08 08:32 AM

I would re-think the hammer gun conversion if I were you. It will most likely take some serious rebuilding to get it to where it would work safely, if ever. I once knew a man who had half of the bridge of his nose removed from a firing pin that blew out of a .410 double barrel shotgun. He had foolishly put a long shell in a short chambered gun. Luckily, it was the right side that blew or he might have been killed. It was a sidelock gun and after the blowup, the hammer on the right lock would rotate completely around on the lockplate. The gun had Floating Firing pins in it that had keeper screws that came in from the side to hold the pins in place. Like most older guns, these screws were badly worn and may have contributed to the accident, but only in a minimal way. It was going to blow up one way or another, anyway.
I know all this because he later brought the gun to me to see if I would fix it for him! I turned down the job and advised him against it being fixed to fire, ever again. Bob H.

Post Extras Print Post   Remind Me!     Notify Moderator


Entire topic
Subject Posted by Posted on
* hammer shotgun conversion razorblade31 13/08/08 03:30 PM
. * * Re: hammer shotgun conversion tinker   29/08/08 04:21 AM
. * * Re: hammer shotgun conversion razorblade31   31/08/08 04:26 PM
. * * Re: hammer shotgun conversion Birdhunter50   09/09/08 08:32 AM

Extra information
0 registered and 22 anonymous users are browsing this forum.

Moderator:  CptCurl 



Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 766

Rate this thread

Jump to

Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved