Home | Ezine | Forums | Links | Contact
NitroExpress.com: winchester 95 9,3x53R

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies


*** Enjoy NitroExpress.com? Participate and join in. ***

Double Rifles, Single Shots & Combinations >> 'Classic' Firearms Photos & Archive

lancaster
.450 member


Reged: 06/05/08
Posts: 5029
Loc: There's a lighthouse in the mi...
Re: winchester 95 9,3x53R
      11/05/09 04:08 PM

at least you have the holes on the target
no, to be seroius, I found the copper plated lead bullets very sensitive with only ligth pitted bores and not 100% correct reloading tactic. also only trust them at 50 meter.
what was your load, vithavouri N110 powder?
what you need is a long softpoint bullet, 286 grains! if this will not grouping you better sell the rifle to me.

the bullet on my pic was made from cut down 222 rem brass(.375 base diameter), loaded one of this copper plated 8mm S bullet inside. it was the only bullet I have on hands to try the new reloading die set. in the name of sience I was making a plinking bullet for a 9,5mm MS on my wish list. see sometimes here that some of you make .366 bullets from such homemade softpoints. when thinking about 9mm parabellum brass(.389)is swaged down to .366 was believing that .375 is much more simple to reduce. a homemade die that endet in .368 because I wasnt careful enough was not pleasent to swage in the rock chucker. in the end I have to rebore it to .3705.
make another .366 die and swage in two steps is maybe the way to go.

--------------------
Norwegian hunter misses moose, shoots man on toilet
.
bringing civilisation to the barbarians

Post Extras Print Post   Remind Me!     Notify Moderator


Entire topic
Subject Posted by Posted on
* winchester 95 9,3x53R lancaster 26/04/09 08:42 PM
. * * Re: winchester 95 9,3x53R mehulkamdar   27/04/09 03:12 AM
. * * Re: winchester 95 9,3x53R 9.3x57   27/04/09 04:45 AM
. * * Re: winchester 95 9,3x53R 9.3x57   27/04/09 04:52 AM
. * * Re: winchester 95 9,3x53R lancaster   27/04/09 10:52 AM
. * * Re: winchester 95 9,3x53R Schauckis   28/04/09 05:00 AM
. * * Re: winchester 95 9,3x53R 9.3x57   28/04/09 08:23 AM
. * * Re: winchester 95 9,3x53R Schauckis   28/04/09 06:01 PM
. * * Re: winchester 95 9,3x53R lancaster   28/04/09 03:48 PM
. * * Re: winchester 95 9,3x53R Schauckis   28/04/09 06:09 PM
. * * Re: winchester 95 9,3x53R lancaster   28/04/09 08:32 PM
. * * Re: winchester 95 9,3x53R 9.3x57   28/04/09 11:56 PM
. * * Re: winchester 95 9,3x53R lancaster   29/04/09 12:15 AM
. * * Re: winchester 95 9,3x53R 9.3x57   29/04/09 12:32 AM
. * * Re: winchester 95 9,3x53R awo425   29/04/09 01:04 AM
. * * Re: winchester 95 9,3x53R Schauckis   30/04/09 05:02 AM
. * * Re: winchester 95 9,3x53R awo425   30/04/09 05:21 AM
. * * Re: winchester 95 9,3x53R Schauckis   01/05/09 05:13 AM
. * * Re: winchester 95 9,3x53R Igorrock   01/05/09 05:46 PM
. * * Re: winchester 95 9,3x53R lancaster   01/05/09 08:38 PM
. * * Re: winchester 95 9,3x53R awo425   11/05/09 04:49 AM
. * * Re: winchester 95 9,3x53R 9.3x57   11/05/09 05:42 AM
. * * Re: winchester 95 9,3x53R lancaster   11/05/09 04:08 PM
. * * Re: winchester 95 9,3x53R lancaster   11/05/09 04:10 PM
. * * Re: winchester 95 9,3x53R 9.3x57   11/05/09 10:26 PM
. * * Re: winchester 95 9,3x53R awo425   12/05/09 06:46 AM
. * * Re: winchester 95 9,3x53R lancaster   12/05/09 08:43 PM
. * * Re: winchester 95 9,3x53R awo425   13/05/09 06:29 AM
. * * Re: winchester 95 9,3x53R Hobbit   03/06/09 11:41 AM
. * * Re: winchester 95 9,3x53R 9.3x57   03/06/09 11:47 AM
. * * Re: winchester 95 9,3x53R awo425   15/06/09 05:15 AM
. * * Re: winchester 95 9,3x53R VonGruff   15/06/09 08:39 AM
. * * Re: winchester 95 9,3x53R awo425   15/06/09 03:34 PM
. * * Re: winchester 95 9,3x53R lancaster   15/06/09 04:04 PM
. * * Re: winchester 95 9,3x53R awo425   16/06/09 04:46 AM
. * * Re: winchester 95 9,3x53R lancaster   16/06/09 12:43 PM
. * * Re: winchester 95 9,3x53R 9.3x57   16/06/09 01:42 PM
. * * Re: winchester 95 9,3x53R awo425   16/06/09 03:40 PM
. * * Re: winchester 95 9,3x53R lancaster   10/08/09 04:50 AM
. * * Re: winchester 95 9,3x53R Schauckis   28/08/09 06:25 AM
. * * Re: winchester 95 9,3x53R Schauckis   30/08/09 02:51 AM
. * * Re: winchester 95 9,3x53R 9.3x57   31/08/09 02:17 AM
. * * Re: winchester 95 9,3x53R Schauckis   31/08/09 06:11 AM
. * * Re: winchester 95 9,3x53R lancaster   30/04/09 05:19 AM
. * * Re: winchester 95 9,3x53R 9.3x57   29/04/09 01:16 AM
. * * Re: winchester 95 9,3x53R awo425   29/04/09 04:46 AM
. * * Re: winchester 95 9,3x53R 9.3x57   29/04/09 11:29 AM
. * * Re: winchester 95 9,3x53R Igorrock   29/04/09 02:48 PM
. * * Re: winchester 95 9,3x53R 9.3x57   29/04/09 03:14 PM
. * * Re: winchester 95 9,3x53R lancaster   29/04/09 04:02 PM
. * * Re: winchester 95 9,3x53R lancaster   29/04/09 04:24 PM
. * * Re: winchester 95 9,3x53R 9.3x57   29/04/09 10:50 PM
. * * Re: winchester 95 9,3x53R awo425   29/04/09 05:29 PM
. * * Re: winchester 95 9,3x53R xausa   28/04/09 11:22 PM
. * * Re: winchester 95 9,3x53R 9.3x57   27/04/09 12:51 AM
. * * Re: winchester 95 9,3x53R lancaster   27/04/09 04:42 AM

Extra information
0 registered and 0 anonymous users are browsing this forum.

Moderator:  CptCurl 



Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 26636

Rate this thread

Jump to

Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved