Home | Ezine | Forums | Links | Contact
NitroExpress.com: .715 Ball loads

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies


*** Enjoy NitroExpress.com? Participate and join in. ***
You are not logged in. [Login] Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Double Rifles, Single Shots & Combinations >> Paradox and Bore Guns
Previous thread Previous   View all threads Index   Next thread Next   Flat Mode Flat  

Alberta
.275 member


Reged: 03/12/07
Posts: 66
Loc: Canada
Re: .715 Ball loads
      10/03/08 08:00 AM

Yes the bottom, cup shaped, over powder, gas check portion of the wad, the ones I am finding are not totally dished out, the bottom of the cup has a convex bump or is flat.

Really the biggest problem with them is they are wads for tapered cases such as the Win AA's and Remington's. They have a gas check that is smaller in diameter than the ball so have no chance of riding on the bore and keeping the ball in the middle. They mic out at .685 my bore is .730 and the ball drops out at .718 The one and only Federal wad that I have (stolen from a factory slug load) is .730 wide and when I push it trough my bbl rides on the bore and holds the ball nicely centred in the gas check. That particular was is a specialty one and is not offed as a component.
I will rustle up some regular Federal wads they may be the ticket to hold the ball if AA's don't pan out. I still need the smaller gas checks off the AA's for powder seal in the Remington hulls.
More testing required LOL!!!

Post Extras Print Post   Remind Me!     Notify Moderator


Entire topic
Subject Posted by Posted on
* .715 Ball loads Alberta 17/01/08 09:21 AM
. * * Re: .715 Ball loads jaz   20/01/08 02:20 AM
. * * Re: .715 Ball loads DarylS   20/01/08 05:43 AM
. * * Re: .715 Ball loads Alberta   20/01/08 01:26 PM
. * * Re: .715 Ball loads DarylS   21/01/08 07:27 AM
. * * Re: .715 Ball loads beleg2   22/01/08 08:59 AM
. * * Re: .715 Ball loads DarylS   05/02/08 04:24 AM
. * * Re: .715 Ball loads beleg2   10/02/08 12:19 PM
. * * Re: .715 Ball loads Alberta   08/03/08 01:46 PM
. * * Re: .715 Ball loads DarylS   09/03/08 02:22 AM
. * * Re: .715 Ball loads Alberta   09/03/08 06:41 AM
. * * Re: .715 Ball loads DarylS   10/03/08 03:42 AM
. * * Re: .715 Ball loads Alberta   10/03/08 08:00 AM
. * * Re: .715 Ball loads DarylS   10/03/08 11:47 AM
. * * Re: .715 Ball loads DarylS   23/01/08 05:30 AM
. * * Re: .715 Ball loads beleg2   23/01/08 11:46 AM
. * * Re: .715 Ball loads DarylS   24/01/08 05:52 AM
. * * Re: .715 Ball loads beleg2   24/01/08 06:34 AM
. * * Re: .715 Ball loads DarylS   25/01/08 04:25 AM
. * * Re: .715 Ball loads Marrakai   25/01/08 11:12 PM
. * * Re: .715 Ball loads DarylS   26/01/08 02:25 AM
. * * Re: .715 Ball loads Sarg   26/01/08 08:35 AM
. * * Re: .715 Ball loads DarylS   27/01/08 06:08 AM
. * * Re: .715 Ball loads beleg2   31/01/08 12:35 PM
. * * Re: .715 Ball loads DarylS   01/02/08 04:29 AM
. * * Re: .715 Ball loads 88MauSporter   01/02/08 05:50 AM
. * * Re: .715 Ball loads DarylS   01/02/08 10:24 AM
. * * Re: .715 Ball loads 88MauSporter   01/02/08 02:02 PM
. * * Re: .715 Ball loads DarylS   02/02/08 01:56 AM
. * * Re: .715 Ball loads 88MauSporter   02/02/08 02:53 AM
. * * Re: .715 Ball loads 9.3x57   17/01/08 12:27 PM

Extra information
0 registered and 9 anonymous users are browsing this forum.

Moderator:  tinker 



Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 8957

Rate this thread

Jump to

Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved